Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA11 GL8 HS UV USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | USA TPC/GL8 HS UV |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.2 % |
| density | ASTM D-792 | 1.03 g/cm3 |
| Mechanical properties | Test Condition | Test Method | USA TPC/GL8 HS UV |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 62.1 MPa |
| Rockwell hardness | R-Scale | ASTM D-785 | 108 |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 74.7 J/m |
| bending strength | ASTM D-790 | 75.8 MPa | |
| elongation at break | ASTM D-638 | 10 % | |
| Flexural modulus | ASTM D-790 | 1100 MPa |
| Electrical performance | Test Condition | Test Method | USA TPC/GL8 HS UV |
|---|---|---|---|
| dielectric strength | ASTM D-149 | 18 kV/mm | |
| Volume resistivity | ASTM D-257 | 1E+11 ohm·cm |
| physical property | Test Condition | Test Method | USA TPC/GL8 HS UV |
|---|---|---|---|
| Shrinkage rate | 3.18mm，Flow | ASTM D-955 | 1.5 % |
| Thermal performance | Test Condition | Test Method | USA TPC/GL8 HS UV |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000013 cm/cm/℃ | |
| Heat distortion temperature | 1.8MPa, Unannealed，HDT | ASTM D-648 | 23.9 ℃ |
| 0.45MPa, Unannealed，HDT | ASTM D-648 | 45 ℃ |
Contact Us
Get App
Top