Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI HU1000 2H4D342 SABIC INNOVATIVE US
ULTEM™
Medical devices、Medical and nursing suppl
Middle flow、Biocompatibility、Steam sterilization
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/HU1000 2H4D342 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 4.0 kJ/m² |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 6.0 kJ/m² |
| 23°C | ISO 180/1A | 6.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/HU1000 2H4D342 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3200 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 85.0 Mpa |
| elongation | 屈服 | ASTM D638 | 7.0 % |
| Tensile strain | 屈服 | ISO 527-2/5 | 6.0 % |
| tensile strength | 断裂 | ASTM D638 | 90.0 Mpa |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 3440 Mpa |
| tensile strength | 屈服 | ISO 527-2/5 | 105 Mpa |
| Tensile modulus | ASTM D638 | 3580 Mpa | |
| elongation | 断裂 | ASTM D638 | 60 % |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 173 Mpa |
| ISO 178 | 160 Mpa | ||
| Flexural modulus | ISO 178 | 3300 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 60 % |
| tensile strength | 屈服 | ASTM D638 | 110 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/HU1000 2H4D342 |
|---|---|---|---|
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 2 |
| Dissipation Factor | 1kHz | ASTM D150 | 1.3E-03 |
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
| dielectric constant | 1kHz | ASTM D150 | 3.15 |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 3 |
| Dissipation Factor | 2.45GHz | ASTM D150 | 2.5E-03 |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 1 |
| dielectric strength | 1.60mm,inAir | ASTM D149 | 33 KV/mm |
| arc resistance | ASTM D495 | PLC 5 | |
| dielectric strength | 1.60mm,在油中 | ASTM D149 | 28 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 4 |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/HU1000 2H4D342 |
|---|---|---|---|
| NBSSmokeDensity-Flaming,Ds,4min | ASTME662 | 0.700 | |
| Limiting Oxygen Index | ASTM D2863 | 47 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/HU1000 2H4D342 |
|---|---|---|---|
| Melt volume flow rate | 220°C/5.0kg | ISO 1133 | 13.0 cm3/10min |
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50-0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.25 % |
| 平衡,23°C | ASTM D570 | 1.3 % | |
| 平衡,23°C,50%RH | ISO 62 | 0.70 % | |
| 饱和,23°C | ISO 62 | 1.3 % | |
| melt mass-flow rate | 337°C/6.6kg | ASTM D1238 | 9.0 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/HU1000 2H4D342 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 201 °C |
| vicat | -- | ISO 306/B120 | 211 °C |
| Linear coefficient of thermal expansion | TD：-20to150°C | ASTME831 | 5.4E-05 cm/cm/°C |
| TD：-40到40°C | ISO 11359-2 | 5E-05 cm/cm/°C | |
| MD：-20to150°C | ASTME831 | 5.6E-05 cm/cm/°C | |
| vicat | -- | ISO 306/B50 | 215 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ISO 11359-2 | 5E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Af | 215 °C |
| vicat | ASTM D152510 | 219 °C |
Contact Us
Get App
Top