Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE) PREPERM® L300 Premix Oy
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Premix Oy/PREPERM® L300 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | -20°C | ISO 180 | 无断裂 |
| Impact strength of cantilever beam gap | -20°C | ISO 180 | 20 kJ/m² |
| -78°C | ISO 180 | 16 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 无断裂 |
| -78°C | ISO 180 | 无断裂 | |
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Premix Oy/PREPERM® L300 |
|---|---|---|---|
| Tensile strain | 屈服 | ISO 527-2 | 10 % |
| 断裂,4.00mm | ISO 527-2 | 30 % | |
| Flexural modulus | 4.00mm | ISO 178 | 2000 MPa |
| tensile strength | 屈服 | ISO 527-2 | 55.0 MPa |
| 4.00mm | ISO 527-2 | 47.0 MPa |
| Electrical performance | Test Condition | Test Method | Premix Oy/PREPERM® L300 |
|---|---|---|---|
| dielectric constant | 1.00GHz | 内部方法 | 3.00 |
| Dissipation Factor | 1.00GHz | 内部方法 | 5E-04 |
| flammability | Test Condition | Test Method | Premix Oy/PREPERM® L300 |
|---|---|---|---|
| UL flame retardant rating | 4.0mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Premix Oy/PREPERM® L300 |
|---|---|---|---|
| Shrinkage rate | MD | ISO 294-4 | 1.0 % |
| melt mass-flow rate | 300°C/5.0kg | ISO 1133 | 16 g/10min |
| density | ISO 1183 | 1.21 g/cm³ |
| Thermal performance | Test Condition | Test Method | Premix Oy/PREPERM® L300 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/Af | 155 °C |
| vicat | -- | ISO 306/A50 | 193 °C |
| -- | ISO 306/B50 | 161 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/Bf | 176 °C |
Contact Us
Get App
Top