Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 MAZMID B 150 FV 10 Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda.
--
--
Filler, glass fiber reinforced material, 10%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | J/m | 70 140 |
| hardness | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| Rockwell hardness | R级 | 122 105 |
| Electrical performance | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| Volume resistivity | ohms·cm | 1E+15 -- | |
| dielectric strength | kV/mm | 21 -- |
| Mechanical properties | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| Flexural modulus | MPa | 4500 2900 | |
| tensile strength | MPa | 100 60.0 | |
| Tensile modulus | MPa | 5000 3100 | |
| elongation | 断裂 | % | 6.0 8.0 |
| bending strength | MPa | 160 80.0 |
| flammability | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | HB -- |
| physical property | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| Shrinkage rate | MD | % | 0.85to1.0 -- |
| density | g/cm³ | 1.19 -- | |
| Water absorption rate | 23°C,24hr | % | 1.3 -- |
| Thermal performance | Test Condition | Test Method | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda./MAZMID B 150 FV 10 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | °C | 190 -- |
| melting temperature | °C | 214to220 -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 3E-05 -- |
| Continuous use temperature | °C | 85.0to90.0 -- | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 150 -- |
Contact Us
Get App
Top