Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM N109-LD LG CHEM KOREA
LUCEL®
--
Type: Unreinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | LG CHEM KOREA/N109-LD |
---|---|---|---|
Water absorption rate | ASTM D-570 | 0.22 % |
thermal performance | Test Condition | Test Method | LG CHEM KOREA/N109-LD |
---|---|---|---|
Combustibility | 1/32" | HB | |
Hot deformation temperature | 4.6kg/cm | ASTM D-648 | 160 ºC |
18kg/cm | ASTM D-648 | 110 ºC |
mechanical properties | Test Condition | Test Method | LG CHEM KOREA/N109-LD |
---|---|---|---|
Bending modulus | ASTM D-790 | 26500 kg/cm | |
bending strength | ASTM D-790 | 1000 kg/cm | |
elongation | ASTM D-638 | 70 % | |
Impact strength of cantilever beam gap | Notched | ASTM D-256 | 7.0 kg.cm/cm |
Unnotched | ASTM D-256 | 80.0 kg.cm/cm | |
Linear coefficient of thermal expansion | ASTM D-695 | 10×0.000001 mm/mm/ºC | |
Rockwell hardness | ASTM D-785 | 82 M(R) | |
Squeezing coefficient | 动 | ASTM D-1894 | 0.16 |
静 | ASTM D-1894 | 0.12 | |
tension | ASTM D-638 | 625 kg/cm |
Electrical performance | Test Condition | Test Method | LG CHEM KOREA/N109-LD |
---|---|---|---|
Antibody accumulation | ASTM D-257 | 1×10 Ω.cm | |
Arc resistance | ASTM D-495 | 240 sec | |
Dielectric constant | ASTM D-150 | 3.8 | |
Dielectric strength | ASTM D-149 | 24 KV/mm | |
Induced positive connection | ASTM D-150 | 0.007 | |
Surface resistance | ASTM D-257 | 1×10 Ω |
Physical properties | Test Condition | Test Method | LG CHEM KOREA/N109-LD |
---|---|---|---|
density | ASTM D-792 | 1.41 | |
Shrinkage rate | 18-22 cm/cm×0.0001 | ||
Taber wear resistance | ASTM D-1044 | 14 mg/1000cycles |