Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
AS(SAN) Hyril® GP355AS ENTEC USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENTEC USA/Hyril® GP355AS |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 16 J/m |
| hardness | Test Condition | Test Method | ENTEC USA/Hyril® GP355AS |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 125 |
| Mechanical properties | Test Condition | Test Method | ENTEC USA/Hyril® GP355AS |
|---|---|---|---|
| Flexural modulus | 23°C | ASTM D790 | 3870 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 71.7 MPa |
| bending strength | 屈服,23°C | ASTM D790 | 123 MPa |
| elongation | 断裂,23°C | ASTM D638 | 2.5 % |
| optical performance | Test Condition | Test Method | ENTEC USA/Hyril® GP355AS |
|---|---|---|---|
| transmissivity | ASTM D1003 | 89.0 % | |
| Haze ratio | ASTM D1003 | 0.60 % |
| physical property | Test Condition | Test Method | ENTEC USA/Hyril® GP355AS |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.30to0.70 % |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 8.0 g/10min |
| density | ASTM D792 | 1.07 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENTEC USA/Hyril® GP355AS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 85.6 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 96.7 °C | |
| vicat | ASTM D15252 | 108 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.9E-05 cm/cm/°C |
Contact Us
Get App
Top