Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PSU TECASON™ S ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ S |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 69 J/m |
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ S |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 120 |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ S |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 106 MPa |
| tensile strength | 断裂,23°C | ASTM D638 | 70.3 MPa |
| Tensile modulus | 23°C | ASTM D638 | 2480 MPa |
| Flexural modulus | 23°C | ASTM D790 | 2690 MPa |
| coefficient of friction | 与自身-动态 | 0.37 | |
| elongation | 断裂,23°C | ASTM D638 | 50to100 % |
| Electrical performance | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ S |
|---|---|---|---|
| dielectric constant | 23°C,60Hz | ASTM D150 | 3.10 |
| dielectric strength | ASTM D149 | 17 kV/mm | |
| Dissipation Factor | 23°C,60Hz | ASTM D150 | 1E-03 |
| Volume resistivity | 23°C | ASTM D257 | 5E+16 ohms·cm |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ S |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.30 % |
| density | ASTM D792 | 1.24 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECASON™ S |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 174 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 181 °C | |
| maximum service temperature | LongTerm | 141 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.6E-05 cm/cm/°C |
| maximum service temperature | ShortTerm | 171 °C |
Contact Us
Get App
Top