Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT+PET Ultradur® B 4040 G10 BASF GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | BASF GERMANY/Ultradur® B 4040 G10 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 kJ/m² |
-30°C | ISO 179/1eU | 70 kJ/m² |
Electrical performance | Test Condition | Test Method | BASF GERMANY/Ultradur® B 4040 G10 |
---|---|---|---|
Volume resistivity | IEC 60093 | 1E+16 ohms·cm | |
relative permittivity | 100Hz | IEC 60250 | 4.70 |
Dissipation Factor | 100Hz | IEC 60250 | 2E-03 |
relative permittivity | 1MHz | IEC 60250 | 4.50 |
Surface Resistivity | IEC 60093 | 1E+13 ohms | |
Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 3 |
Dissipation Factor | 1MHz | IEC 60250 | 0.015 |
Mechanical properties | Test Condition | Test Method | BASF GERMANY/Ultradur® B 4040 G10 |
---|---|---|---|
Tensile modulus | ISO 527-2 | 18000 MPa | |
tensile strength | 断裂 | ISO 527-2 | 170 MPa |
Tensile strain | 断裂 | ISO 527-2 | 1.6 % |
Flexural modulus | ISO 178 | 17700 MPa | |
bending strength | ISO 178 | 270 MPa |
flammability | Test Condition | Test Method | BASF GERMANY/Ultradur® B 4040 G10 |
---|---|---|---|
Flammability level | 1.6mm | IEC 60695-11-10,-20 | HB |
0.75mm | IEC 60695-11-10,-20 | HB |
physical property | Test Condition | Test Method | BASF GERMANY/Ultradur® B 4040 G10 |
---|---|---|---|
Apparent density | 0.70to0.80 g/cm³ | ||
Melt volume flow rate | 275°C/2.16kg | ISO 1133 | 8.50 cm³/10min |
Shrinkage rate | free,longitudinal | 0.10 % | |
TD | ISO 294-4 | 0.77 % | |
viscosity number | ISO 307 | 90.0 cm³/g | |
Shrinkage rate | MD | ISO 294-4 | 0.24 % |
Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
饱和,23°C | ISO 62 | 0.40 % | |
density | ISO 1183 | 1.73 g/cm³ | |
Shrinkage rate | free,transverse | 0.75 % |
Thermal performance | Test Condition | Test Method | BASF GERMANY/Ultradur® B 4040 G10 |
---|---|---|---|
melting temperature | ISO 11357-3 | 223 °C | |
Heat distortion temperature | 0.45MPa,未退火,HDT | ISO 75-2/B | 221 °C |
1.8MPa,未退火,HDT | ISO 75-2/A | 205 °C | |
TEMPERATURE | 最高使用温度-shortcycleoperation | IEC 60216 | 210 °C |
--4 | IEC 60216 | 140 °C | |
Linear coefficient of thermal expansion | MD:23到80°C | ISO 11359-2 | 1.0E-5到2.0E-5 cm/cm/°C |
specific heat | 950 J/kg/°C | ||
TEMPERATURE | --5 | IEC 60216 | 160 °C |
Contact Us
Get App
Top