Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B30S LANXESS GERMANY
Durethan®
--
--
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | LANXESS GERMANY/B30S |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | <10/2<10 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 110/35 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2900/850 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 3200/1000 kg/cm²(MPa)[Lb/in²] | |
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | <10/<10 kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 4/20 % | |
| tensile strength | ASTM D638/ISO 527 | 50/60 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | LANXESS GERMANY/B30S |
|---|---|---|---|
| characteristic | 标准注射级.易流动.易脱模.快速固化 |
| Physical properties | Test Condition | Test Method | LANXESS GERMANY/B30S |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.14 % | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | /110 g/10min |
| Thermal performance | Test Condition | Test Method | LANXESS GERMANY/B30S |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 55 ℃（℉） |
| vicat | ASTM D1525/ISO R306 | -200 ℃（℉） | |
| melting temperature | 222 ℃（℉） | ||
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 1.0 mm/mm.℃ |
Contact Us
Get App
Top