Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DMX1435-GY6E563T SABIC INNOVATIVE SINGAPHORE
LEXAN™
Electronic and electrical、Automotive components、Wire and cable
Scratch resistant、High temperature resistan、high strength
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SABIC INNOVATIVE SINGAPHORE/DMX1435-GY6E563T |
|---|---|---|---|
| ball-indentation hardness | H358/30 | ISO 2039 | 128 Mpa |
| Rockwell hardness | M标尺 | ASTM D785 | 93 |
| L标尺 | ASTM D785 | 108 | |
| Hardness | 1.0kg | ASTM D3363 | H |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SINGAPHORE/DMX1435-GY6E563T |
|---|---|---|---|
| Instrumented impact | 23℃总能量 | ASTM D3763 | 30 J |
| Impact strength of cantilever beam gap | -30℃ 3.0mm | ISO 180 | 45 kJ/m² |
| Flexural modulus | 1.3mm/min | ASTM D790 | 2600 Mpa |
| Taber wear resistance | CS-17轮1kg | ASTM D1044 | 10 mg/1000cy |
| Erichsen scratch depth | 6N | 内部测试方法 | 14 micrometer |
| Charpy Notched Impact Strength | -30℃ 3.0mm | ISO 179 | 47 kJ/m² |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 30 J/m |
| Charpy Notched Impact Strength | 23°C3.0mm 1eA型 | ISO 179 | 3 kJ/m² |
| 30℃ 3.0mm 1eA型^ | ISO 179 | 3 kJ/m² | |
| Impact strength of cantilever beam gap | “-30℃ 3.0mm A型缺口 | ISO 180 | 4 kJ/m² |
| 23°C 3.0mm A型缺口 | ISO 180 | 5 kJ/m² | |
| tensile strength | 屈服50mm/min | ISO 527 | 80 Mpa |
| Tensile modulus | 50mm/min | ASTM D638 | 2900 Mpa |
| Charpy Notched Impact Strength | 23°C 3.0mm | ISO 179 | NB kJ/m² |
| bending strength | 屈服1.3mm/min | ASTM D790 | 120 Mpa |
| Suspended wall beam without notch impact strength | 23°C 3.0mm | ISO 180 | NB kJ/m² |
| elongation | 断裂50mm/min | ISO 527 | 40 % |
| tensile strength | 屈服50mm/min I型 | ASTM D638 | 80 Mpa |
| bending strength | 屈服2.0mm/min | ISO 178 | 108 Mpa |
| elongation | 屈服50mm/min iI型 | ASTM D638 | 7 % |
| Flexural modulus | 2.0mm/min | ISO 178 | 2450 Mpa |
| tensile strength | 断裂50mm/mini型 | ASTM D638 | 65 Mpa |
| Tensile modulus | 1.0mm/min | ISO 527 | 2450 Mpa |
| elongation | 屈服50mm/min | ISO 527 | 7 % |
| Impact strength of cantilever beam gap | -30℃ | ASTM D256 | 30 J/m |
| Taiberten loss | CS-17轮1kg | 内部测试方法 | 10 mg/1000cy |
| Suspended wall beam without notch impact strength | 23℃ | ASTM D4812 | NB J/m |
| tensile strength | 斯裂50mm/min | ISO 527 | 60 Mpa |
| elongation | 断裂50mm/min I型 | ASTM D638 | 70 % |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE SINGAPHORE/DMX1435-GY6E563T |
|---|---|---|---|
| transmissivity | 2540pm | ASTM DI 003 | 88 % |
| Haze ratio | 2540Pm | ASTM D1003 | 0.8 % |
| refractive index | ASTM D542 | 1.584 | |
| ISO 489 | 1.584 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE SINGAPHORE/DMX1435-GY6E563T |
|---|---|---|---|
| melt mass-flow rate | 300℃ 1.2kg | ASTM D1238 | 14.5 g/10min |
| Water absorption rate | 23℃ 50RH | ISO 62 | 0.13 % |
| specific volume | ASTM D792 | 0.85 cm³/g | |
| Water absorption rate | 24hr | ASTM D570 | 0.08 % |
| melt mass-flow rate | 300℃ 1.2kg | ISO 1133 | 13 cm3/10min |
| Shrinkage rate | 流动3.2mm | 内部测试方法 | 0.5-0.8 % |
| Water absorption rate | 50RH平衡 | ASTM D570 | 0.13 % |
| 23℃平衡 | ASTM D570 | 0.28 % | |
| 23℃饱和 | ISO 62 | 0.27 % | |
| density | ASTM D792 | 1.2 g/cm³ | |
| ISO 1183 | 1.17 g/cm³ | ||
| Water absorption rate | 50RH 24hr | ASTM D570 | 0.04 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SINGAPHORE/DMX1435-GY6E563T |
|---|---|---|---|
| Ball indentation test | IEC 60695 | 140 °C | |
| specific heat | ASTM C351 | 1.4 J/(g.℃) | |
| thermal conductivity | ISO 8302 | 0.2 w/(m.℃) | |
| Heat distortion temperature | 未退火0.45MPa 3.2mm，HDT | ASTM D648 | 133 °C |
| Linear coefficient of thermal expansion | 垂直23~80℃ | ISO 11359 | 0.000070 cm/cm/℃ |
| vicat | 50℃/hr 50N | ISO 306 | 138 °C |
| thermal conductivity | ASTM C177 | 0.2 w/(m.℃) | |
| Heat distortion temperature | 未退火1.8MPa 3.2mm，HDT | ASTM D648 | 119 °C |
| vicat | 50℃/hr 50N | ASTM DI 525 | 139 °C |
| Linear expansion coefficient flow | -40.0~95℃ | ASTM E831 | 0.000070 cm/cm/℃ |
| Heat distortion temperature | 1.8MPa 4.0mm，HDT | ISO 75 | 118 °C |
| Linear coefficient of thermal expansion | 流动23~80℃ | ISO 11359 | 0.000070 cm/cm/℃ |
| Heat distortion temperature | 0.45MPa 4.0mm，HDT | ISO 75 | 131 °C |
| vicat | 120℃/hr 50N | ISO 306 | 140 °C |
| Vertical expansion coefficient | -40.0~95℃ | ASTM E831 | 0.000070 cm/cm/℃ |
Contact Us
Get App
Top