Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC LGS-2330M MITSUBISHI ENGINEERING JAPAN
IUPILON™
fibre
enhance,Glass fiber reinforced,wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2330M |
|---|---|---|---|
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 151 ℃(℉) |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000067 mm/mm.℃ |
| mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2330M |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 8600 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 173 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 9500 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 100 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2330M |
|---|---|---|---|
| characteristic | 耐磨损性良好 | ||
| remarks | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LGS-2330M |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.25-0.45 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.080 % |