Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS/PA M/MK 8 A SCHULMAN USA
SCHULABLEND®
--
Filler: Glass fiber reinf,8.0% filler by weight,20% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Ball Pressure Test | H358/30 | ISO 2039-1 | 97.0 Mpa |
| thermal performance | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,未退火 | ISO 75-2/Af | 101 °C |
| 0.45MPa,未退火 | ISO 75-2/Bf | 179 °C | |
| Vicat softening temperature | -- | ISO 306/B50 | 128 °C |
| -- | ISO 306/A50 | 213 °C |
| mechanical properties | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1A/1 | 4900 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/1A/5 | 4.5 % |
| 屈服 | ISO 527-2/1A/50 | 3.0 % | |
| tensile strength | 断裂 | ISO 527-2/1A/5 | 77.0 Mpa |
| 屈服 | ISO 527-2/1A/50 | 43.0 Mpa |
| Electrical performance | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+13 ohms·cm |
| Physical properties | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | 250°C/5.0kg | ISO 1133 | 2.00 cm3/10min |
| impact performance | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 36 kJ/m² |
| flammability | Test Condition | Test Method | A SCHULMAN USA/M/MK 8 |
|---|---|---|---|
| Burning rate | ISO 3795 | <100 mm/min | |
| Flammability level | 1.5mm | IEC 60695-11-10,-20 | HB |
| UL flame retardant rating | 1.6mm | IEC 60695-11-10,-20 | HB |