Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DFL-4032 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Casters,Electronic and Electrical Applications
Easy to demould,Easy to form
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/DFL-4032 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,未退火,3.20mm | ASTM D648 | 141 °C |
| 1.8MPa,未退火,64.0mm跨距 | ISO 75-2/Af | 140 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/DFL-4032 |
|---|---|---|---|
| Bending modulus | ISO 178 | 4170 Mpa | |
| ASTM D790 | 4350 Mpa | ||
| bending strength | ASTM D790 | 124 Mpa | |
| ISO 178 | 114 Mpa | ||
| elongation | 断裂 | ASTM D638 | 3.1 % |
| Tensile modulus | ISO 527-2/1 | 4290 Mpa | |
| ASTM D638 | 4350 Mpa | ||
| Tensile strain | 断裂 | ISO 527-2 | 2.8 % |
| tensile strength | 断裂 | ISO 527-2 | 71.0 Mpa |
| 断裂 | ASTM D638 | 73.4 Mpa |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/DFL-4032 |
|---|---|---|---|
| Shrinkage rate | TD：24hr | ASTM D955 | 0.70 % |
| TD:24小时 | ISO 294-4 | 0.67 % | |
| MD：24小时 | ASTM D955 | 0.20 % | |
| MD:24小时 | ISO 294-4 | 0.23 % | |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.11 % |
| 平衡,23°C,50%RH | ISO 62 | 0.18 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/DFL-4032 |
|---|---|---|---|
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 11.6 J |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 10 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 4.29 J | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 34 kJ/m² |