Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Homopolymer Braskem PP H 105 Braskem America Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Braskem America Inc./Braskem PP H 105 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,注塑 | ASTM D256 | 25 J/m |
| 23°C,注塑 | ISO 180 | 2.1 kJ/m² |
| hardness | Test Condition | Test Method | Braskem America Inc./Braskem PP H 105 |
|---|---|---|---|
| Rockwell hardness | R级,注塑 | ASTM D785 | 102 |
| R-Scale | ISO 2039-2 | 103 |
| Mechanical properties | Test Condition | Test Method | Braskem America Inc./Braskem PP H 105 |
|---|---|---|---|
| Flexural modulus | 注塑 | ASTM D790 | 1700 MPa |
| tensile strength | 屈服,注塑 | ASTM D638 | 39.0 MPa |
| Flexural modulus | 注塑 | ISO 178 | 1600 MPa |
| elongation | 屈服,注塑 | ASTM D638 | 8.0 % |
| tensile strength | 屈服,注塑 | ISO 527-2 | 36.0 MPa |
| Tensile strain | 屈服,注塑 | ISO 527-2 | 11 % |
| optical performance | Test Condition | Test Method | Braskem America Inc./Braskem PP H 105 |
|---|---|---|---|
| Haze ratio | 1000µm,InjectionMolded | ISO 13468-1 | 28 % |
| 1000µm,InjectionMolded | ASTM D1003 | 34 % |
| physical property | Test Condition | Test Method | Braskem America Inc./Braskem PP H 105 |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 40 g/10min |
| density | ASTM D792 | 0.905 g/cm³ | |
| ISO 1183 | 0.905 g/cm³ | ||
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 40 g/10min |
| Thermal performance | Test Condition | Test Method | Braskem America Inc./Braskem PP H 105 |
|---|---|---|---|
| vicat | ASTM D15253 | 154 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 113 °C |
| 1.8MPa,未退火,注塑，HDT | ASTM D648 | 59.0 °C | |
| 0.45MPa,未退火,注塑，HDT | ASTM D648 | 110 °C | |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 59.0 °C | |
| vicat | ISO 306/A | 153 °C |
Contact Us
Get App
Top