Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

AES ESA20-450 UMG JAPAN
DIALAC®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | UMG JAPAN/ESA20-450 |
---|---|---|---|
Rockwell hardness | ISO 2039-2 | 110 R |
thermal performance | Test Condition | Test Method | UMG JAPAN/ESA20-450 |
---|---|---|---|
Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/Af | 83 °C |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 7E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | UMG JAPAN/ESA20-450 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 2700 Mpa |
bending strength | 23°C | ISO 178 | 80 Mpa |
Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 4.0 kJ/m² |
23°C | ISO 179/1eA | 11 kJ/m² | |
Tensile modulus | 23°C | ISO 527-2 | 2600 Mpa |
tensile strength | 23°C | ISO 527-2 | 50 Mpa |
flame retardant performance | Test Condition | Test Method | UMG JAPAN/ESA20-450 |
---|---|---|---|
UL flame retardant rating | UL -94 | HB 1.50mm | |
UL -94 | HB 3.00mm |
Electrical performance | Test Condition | Test Method | UMG JAPAN/ESA20-450 |
---|---|---|---|
Dielectric strength | IEC 60243-1 | 32 KV/mm | |
Volume resistivity | IEC 60093 | 1E+15 Ω.cm |
Physical properties | Test Condition | Test Method | UMG JAPAN/ESA20-450 |
---|---|---|---|
melt mass-flow rate | 220℃/10Kg | ISO 1133 | 22.00 cm3/10min |
Shrinkage rate | MD2.0mm | ISO 294-4 | 0.65 % |