Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Plastomer, Ethylene-based Premi-Glas® 1200H-15 USA Premix
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | USA Premix/Premi-Glas® 1200H-15 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD4 | 3.5E-05 cm/cm/°C | |
| MD3 | 2.5E-05 cm/cm/°C | ||
| RTI Elec | UL 746 | 130 °C | |
| RTI Imp | UL 746 | 130 °C | |
| RTI Str | UL 746 | 130 °C | |
| thermal conductivity | ASTMC177 | 0.30 W/m/K |
| mechanical properties | Test Condition | Test Method | USA Premix/Premi-Glas® 1200H-15 |
|---|---|---|---|
| Bending modulus | Compression Molded | ASTM D790 | 9650 MPa |
| bending strength | Compression Molded | ASTM D790 | 96.5 MPa |
| compressive strength | ASTM D695 | 145 MPa | |
| Poisson's ratio | 0.30 | ||
| Tensile modulus | Compression Molded | ASTM D638 | 11700 MPa |
| tensile strength | Compression Molded | ASTM D638 | 34.5 MPa |
| Electrical performance | Test Condition | Test Method | USA Premix/Premi-Glas® 1200H-15 |
|---|---|---|---|
| Arc resistance | ASTM D495 | 180 sec | |
| Dielectric strength | ASTM D149 | 15 kV/mm |
| Physical properties | Test Condition | Test Method | USA Premix/Premi-Glas® 1200H-15 |
|---|---|---|---|
| density | 1.70to1.85 g/cm³ | ||
| Outdoor applicability | UL 746C | f1 | |
| Shrinkage rate | MD | 0.15to0.25 % |
| impact performance | Test Condition | Test Method | USA Premix/Premi-Glas® 1200H-15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTM D256 | 430 J/m |
| Suspended wall beam without notch impact strength | Compression Molded | ASTM D4812 | 590 J/m |
| flammability | Test Condition | Test Method | USA Premix/Premi-Glas® 1200H-15 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |