Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP RIPP 490 A SCHULMAN USA
POLYFORT®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
Ball Pressure Test | 125°C | IEC 60695-10-2 | Pass |
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/Af | 58.0 °C |
0.45MPa,Unannealed | ISO 75-2/Bf | 108 °C | |
RTI Elec | 1.5mm | UL 746 | 65.0 °C |
3.0mm | UL 746 | 65.0 °C | |
RTI Imp | 1.5mm | UL 746 | 65.0 °C |
3.0mm | UL 746 | 65.0 °C | |
RTI Str | 3.0mm | UL 746 | 65.0 °C |
1.5mm | UL 746 | 65.0 °C | |
Vicat softening temperature | -- | ISO 306/B50 | 72.0 °C |
-- | ISO 306/A50 | 150 °C |
mechanical properties | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
Tensile modulus | ISO 527-2/1A/1 | 1900 Mpa | |
Tensile strain | Yield | ISO 527-2/1A/50 | 3.0 % |
tensile strength | Yield | ISO 527-2/1A/50 | 22.0 Mpa |
Electrical performance | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
High arc combustion index | 1.5mm | UL 746 | PLC 0 |
3.0mm | UL 746 | PLC 0 | |
Hot wire ignition | 3.0mm | UL 746 | PLC 0 |
1.5mm | UL 746 | PLC 3 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | >1.0E+13 ohms·cm |
other | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
characteristic | 磷含量.低(-无).共聚物.阻燃性能 | ||
remarks | 注射成型 |
Physical properties | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.04 | |
Melt Volume Flow Rate (MVR) | 230°C/2.16kg | ISO 1133 | 9.00 cm3/10min |
impact performance | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 11 kJ/m² |
23°C | ISO 179/1eU | 37 kJ/m² |
flammability | Test Condition | Test Method | A SCHULMAN USA/RIPP 490 |
---|---|---|---|
Burning rate | 3.00mm,自动灭火 | ISO 3795 | 0.0 mm/min |
1.50mm,自动灭火 | ISO 3795 | 0.0 mm/min | |
Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
1.5mm | IEC 60695-2-12 | 960 °C | |
Extreme Oxygen Index | ISO 4589-2 | 36 % | |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 725 °C |
1.5mm | IEC 60695-2-13 | 725 °C | |
UL flame retardant rating | 3.0mm | IEC 60695-11-10,-20 | V-0 |
3.0mm | UL 94 | V-0 | |
1.5mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | UL 94 | V-0 |