Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 SLOVAMID® 66 GF 40 E/2M PLASTCOM SLOVAKIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 66 GF 40 E/2M |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 11 kJ/m² |
| Impact strength of simply supported beam without notch | -20°C | ISO 179 | 75 kJ/m² |
| Charpy Notched Impact Strength | -20°C | ISO 179 | 8.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 75 kJ/m² |
| Mechanical properties | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 66 GF 40 E/2M |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 12300 MPa | |
| Tensile strain | 屈服 | ISO 527-2 | 3.5 % |
| tensile strength | 屈服 | ISO 527-2 | 175 MPa |
| Flexural modulus | ISO 178 | 6500 MPa | |
| bending strength | ISO 178 | 230 MPa |
| Electrical performance | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 66 GF 40 E/2M |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 25 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+14 ohms |
| flammability | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 66 GF 40 E/2M |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Hot filament ignition temperature | IEC 60695-2-13 | 650 °C |
| physical property | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 66 GF 40 E/2M |
|---|---|---|---|
| density | ISO 1183 | 1.43 g/cm³ | |
| melt mass-flow rate | 275°C/2.16kg | ISO 1133 | 5.0 g/10min |
| water content | ISO 960 | 0.15 % |
| Thermal performance | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 66 GF 40 E/2M |
|---|---|---|---|
| vicat | ISO 306/B | 250 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 250 °C |
| melting temperature | ISO 3146 | 260 °C |
Contact Us
Get App
Top