Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PTFE TFM1600 3M USA
Dyneon™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
Shore hardness | ShoreD | ISO 868 | 59 |
film | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
elongation | Break,200μm | ISO 527-3 | 600 % |
tensile strength | 200μm | ISO 527-3 | 37.0 Mpa |
thermal performance | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
Linear coefficient of thermal expansion | MD:30to260°C | DIN 53752 | 1.7E-04 cm/cm/°C |
MD:30to200°C | DIN 53752 | 1.4E-04 cm/cm/°C | |
MD:30to100°C | DIN 53752 | 1.2E-04 cm/cm/°C | |
thermal conductivity | DIN 52612 | 0.22 W/m/K |
mechanical properties | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
Hot deformation temperature | 15MPa3 | ASTM D621 | 9.00 % |
15MPa2 | ASTM D621 | 8.00 % | |
15MPa4 | ASTM D621 | 4.00 % | |
Tensile modulus | 23°C | ISO 527-2 | 650 Mpa |
Electrical performance | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
Dielectric strength | 0.200mm | ISO 12086 | 78 KV/mm |
Surface resistivity | IEC 60093 | 1E+17 ohms | |
Volume resistivity | IEC 60093 | 1E+18 ohms·cm |
Physical properties | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
Apparent density | ISO 60 | 0.82 g/cm³ | |
Average particle size | ISO 13320 | 450 µm | |
Shrinkage rate | Internal Method | 3.4 % |
flammability | Test Condition | Test Method | 3M USA/TFM1600 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |