Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC UF-1050 K24351 LOTTE CHEM DONGGUAN
INFINO®
Electronic and Electrical、Automotive industry、Electrical components、Phone
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | LOTTE CHEM DONGGUAN/UF-1050 K24351 |
|---|---|---|---|
| Rockwell hardness | R 计秤 | ISO 2039-2 | 119 |
| R 级 | ASTM D785 | 119 |
| Mechanical properties | Test Condition | Test Method | LOTTE CHEM DONGGUAN/UF-1050 K24351 |
|---|---|---|---|
| tensile strength | 屈服 | ISO 527-2/50 | 65.0 Mpa |
| 屈服3 | ASTM D638 | 64.0 Mpa | |
| elongation | 断裂3 | ASTM D638 | 85 % |
| bending strength | --4 | ASTM D790 | 93.0 Mpa |
| --5 | ISO 178 | 90.0 Mpa | |
| Tensile modulus | --3 | ASTM D638 | 2100 Mpa |
| -- | ISO 527-2/50 | 2100 Mpa | |
| elongation | 断裂 | ISO 527-2/50 | 85 % |
| Flexural modulus | --4 | ASTM D790 | 2500 Mpa |
| --5 | ISO 178 | 2400 Mpa | |
| tensile strength | 断裂3 | ASTM D638 | 64.0 Mpa |
| 断裂 | ISO 527-2/50 | 65.0 Mpa |
| flammability | Test Condition | Test Method | LOTTE CHEM DONGGUAN/UF-1050 K24351 |
|---|---|---|---|
| UL flame retardant rating | 1.030mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | LOTTE CHEM DONGGUAN/UF-1050 K24351 |
|---|---|---|---|
| Shrinkage rate | 横向流动 : 3.20 mm | ASTM D955 | 0.40 - 0.60 % |
| 流量 : 2.00 mm | ISO 294-4 | 0.40 - 0.60 % | |
| 流动 : 3.20 mm | ASTM D955 | 0.40 - 0.60 % | |
| 横向流量 : 2.00 mm | ISO 294-4 | 0.40 - 0.60 % | |
| melt mass-flow rate | 220°C/10.0 kg | ASTM D1238 | 20 g/10 min |
| Thermal performance | Test Condition | Test Method | LOTTE CHEM DONGGUAN/UF-1050 K24351 |
|---|---|---|---|
| vicat | ISO 306/B50 | 108 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火, 4.00 mm，HDT | ISO 75-2/A | 92.0 °C |
| 1.8 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 97.0 °C | |
| 0.45 MPa, 未退火, 4.00 mm，HDT | ISO 75-2/B | 105 °C | |
| 0.45 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 105 °C |
| injection | Test Condition | Test Method | LOTTE CHEM DONGGUAN/UF-1050 K24351 |
|---|---|---|---|
| screw speed | 50 to 150 rpm | ||
| Suggested maximum moisture content | < 0.050 % | ||
| Vacuum dryer | 80 °C | ||
| Injection Pressure | 98.1 Mpa | ||
| Hot air dryer | 4.0 hr | ||
| Temperature in the middle of the barrel | 260 to 280 °C | ||
| Temperature at the rear of the barrel | 250 to 270 °C | ||
| Vacuum dryer | 4.0 hr | ||
| Temperature at the front of the material cylinder | 270 to 290 °C | ||
| Back pressure | 0.490 to 1.96 Mpa | ||
| Temperature | 60 to 80 °C | ||
| Hot air dryer | 80 °C | ||
| Spray nozzle temperature | 270 to 290 °C |
Contact Us
Get App
Top