Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS P2H-AT ELIX POLYMERS SPANISH
--
Application in the automo
Filler: Glass fiber reinf、16% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO179 | 18 kJ/m² |
| -30°C | ISO179 | 20 kJ/m² | |
| 23°C | ISO179/1eU | 100 kJ/m² | |
| -30°C | ISO179/1eU | 80 kJ/m² |
| hardness | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| ISO2039-1 | 110 Mpa |
| Mechanical properties | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO527-2/50 | >15 % |
| Flexural modulus | 23°C | ISO178 | 2400 Mpa |
| TensileCreepModule | 1hr | ISO899-1 | 2200 Mpa |
| Bending stress | ISO178 | 101 Mpa | |
| Tensile modulus | ISO527-2 | 5500 Mpa | |
| Tensile stress | 屈服,23°C | ISO527-2 | 74.0 Mpa |
| Tensile modulus | 23°C | ISO527-2/1 | 2500 Mpa |
| Tensile creep modulus | 1000hr | ISO899-1 | 1500 Mpa |
| 23°C | ISO178 | 70.0 Mpa | |
| Tensile stress | 断裂,23°C | ISO527-2 | 74.0 Mpa |
| 屈服,23°C | ISO527-2/50 | 44.0 Mpa | |
| Tensile strain | 屈服,23°C | ISO527-2/50 | 2.1 % |
| Flexural modulus | ISO178 | 5400 Mpa | |
| Tensile strain | 断裂,23°C | ISO527-2 | 2.0 % |
| Electrical performance | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| Surface Resistivity | IEC60093 | 1E+15 ohms | |
| 23°C,1MHz | IEC60250 | 2.90 | |
| dielectric strength | 23°C,1.00mm | IEC60243-1 | 34 KV/mm |
| Dissipation Factor | 1MHz | IEC60250 | 6E-03 |
| 1MHz | IEC60250 | 3.10 | |
| Dissipation Factor | 23°C,1MHz | IEC60250 | 9E-03 |
| 100Hz | IEC60250 | 2.90 | |
| 23°C,100Hz | IEC60250 | 3.00 | |
| CTI | IEC60112 | 575 V | |
| Dissipation Factor | 100Hz | IEC60250 | 5E-03 |
| CTI | 解决方案A | IEC60112 | 600 V |
| Volume resistivity | IEC60093 | 1E+15 ohms·cm | |
| dielectric strength | 1.50mm | IEC60243-1 | 32 KV/mm |
| Dissipation Factor | 23°C,100Hz | IEC60250 | 5.5E-03 |
| flammability | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| Burning wire flammability index | 2.0mm | IEC60695-2-12 | 700 °C |
| Burning rate 4 | 2.00mm | ISO3795 | 60 mm/min |
| FlameRating | 1.6mm | UL94 | HB |
| physical property | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| Shrinkage rate | TD | ISO294-4 | 0.40to0.60 % |
| Ash Content | 16 % | ||
| Shrinkage rate | MD | ISO294-4 | 0.40to0.60 % |
| Melt volume flow rate | 220°C/10.0kg | ISO1133 | 37.0 cm3/10min |
| Shrinkage rate | ISO294-4 | 0.20到0.40 % |
| Thermal performance | Test Condition | Test Method | ELIX POLYMERS SPANISH/P2H-AT |
|---|---|---|---|
| vicat | ISO306/B50 | 98.0 °C | |
| 0.45MPa,退火 | ISO75-2/B | 97.0 °C | |
| Hot deformation temperature 3 | 1.8MPa,退火 | ISO75-2/A | 102 °C |
| 1.8MPa,退火 | ISO75-2/A | 93.0 °C | |
| Hot deformation temperature 3 | 0.45MPa,退火 | ISO75-2/B | 106 °C |
| MD | ISO11359-1 | 4E-05 cm/cm/°C | |
| MD：23到55°C | ISO11359-2 | 9E-05 cm/cm/°C |
Contact Us
Get App
Top