Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP F-300SP PRIME POLYMER JAPAN
PRIME POLYPRO
film
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | PRIME POLYMER JAPAN/F-300SP |
|---|---|---|---|
| melt mass-flow rate | 230℃ | ISO 1133 | 3.0 g/10min |
| density | ISO 1183 | 0.910 g/cm³ |
| Mechanical properties | Test Condition | Test Method | PRIME POLYMER JAPAN/F-300SP |
|---|---|---|---|
| tensile strength | ISO 527 | 34 Mpa | |
| Impact strength of cantilever beam gap | 23℃ | ISO 179 | 6 kJ/m² |
| Shore hardness | R-Scale | ISO 2039-2 | 100 |
| elongation | ISO 527 | 120 % |
| other | Test Condition | Test Method | PRIME POLYMER JAPAN/F-300SP |
|---|---|---|---|
| purpose | 通用级.应用于BOPP。 |
| Physical properties | Test Condition | Test Method | PRIME POLYMER JAPAN/F-300SP |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 0.910 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 3.0 g/10min |
| physical property | Test Condition | Test Method | PRIME POLYMER JAPAN/F-300SP |
|---|---|---|---|
| Load resistant bending temperature | 0.45MPa | ASTM D-75 | 100 °C |
Contact Us
Get App
Top