Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
EAA 1410 STYRON US
PRIMACOR™
film
High toughness、Heat sealing performance、high strength
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| film | Test Condition | Test Method | STYRON US/1410 |
|---|---|---|---|
| tensile strength | TD:屈服,51µm | ASTM D882 | 10.9 Mpa |
| Elmendorf tear strength | TD:51µm | ASTM D1922 | 510 g |
| Dart impact | 51µm | ASTMD1709B | 580 g |
| elongation | TD:断裂,51µm | ASTMD882 | 470 % |
| tensile strength | MD:断裂,51µm | ASTMD882 | 37.9 Mpa |
| MD:屈服,51µm | ASTM D882 | 11.8 Mpa | |
| elongation | MD:断裂,51µm | ASTMD882 | 400 % |
| Elmendorf tear strength | MD:51µm | ISO 6383-2 | 1700 N |
| tensile strength | TD:屈服,51µm | ISO 527-3 | 10.9 Mpa |
| Elmendorf tear strength | TD:51µm | ISO 6383-2 | 2300 N |
| tensile strength | TD:断裂,51µm | ASTMD882 | 38.1 Mpa |
| Elmendorf tear strength | MD:51µm | ASTM D1922 | 380 g |
| tensile strength | MD:屈服,51µm | ISO 527-3 | 11.8 Mpa |
| Basic performance | Test Condition | Test Method | STYRON US/1410 |
|---|---|---|---|
| melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 1.5 g/10min |
| Monomer content | Internal Method | % | |
| melt mass-flow rate | 190℃/2.16kg | ASTM D-1238 | 1.5 g/10min |
| Mechanical properties | Test Condition | Test Method | STYRON US/1410 |
|---|---|---|---|
| tensile strength | 50.8um，TD,断裂 | ASTM D-882 | 38.1 MPa |
| 屈服,模压成型 | ISO 527-2/508 | 8.39 Mpa | |
| 50.8um，屈服,MD | ASTM D-882 | 11.8 MPa | |
| elongation | 断裂,模压成型 | ISO 527-2/508 | 640 % |
| elongation at break | 50.8um，TD | ASTM D-882 | 470 % |
| tensile strength | 屈服,Compression Molded | ISO 527-2/508 | 8.39 MPa |
| 50.8um，屈服,TD | ISO 527-3 | 10.9 MPa | |
| Elmendorf tear strength | 50.8um，MD | ISO 6383-2 | 1700 N |
| tensile strength | Compression Molded，断裂 | ASTM D-638 | 22.5 MPa |
| 50.8um，MD,断裂 | ASTM D-882 | 37.9 MPa | |
| elongation at break | 50.8um，TD | ISO 527-3 | 470 % |
| Elmendorf tear strength | 50.8um，TD | ASTM D-1922 | 510 g |
| tensile strength | 断裂,模压成型4 | ASTM D638 | 22.5 Mpa |
| 50.8um，TD,断裂 | ISO 527-3 | 38.1 MPa | |
| Dart impact | 50.8um | ASTM D-1709B | 580 g |
| tensile strength | 断裂,模压成型 | ISO 527-2/508 | 22.5 Mpa |
| 屈服,Compression Molded | ASTM D-638 | 8.39 MPa | |
| 50.8um，屈服,TD | ASTM D-882 | 10.9 MPa | |
| 50.8um，屈服,MD | ISO 527-3 | 11.8 MPa | |
| Compression Molded，断裂 | ISO 527-2/508 | 22.5 MPa | |
| elongation at break | 50.8um，MD | ASTM D-882 | 400 % |
| Elmendorf tear strength | 50.8um，MD | ASTM D-1922 | 380 g |
| elongation at break | 50.8um，MD | ISO 527-3 | 400 % |
| Elmendorf tear strength | 50.8um，TD | ISO 6383-2 | 2300 N |
| tensile strength | 50.8um，MD,断裂 | ISO 527-3 | 37.9 MPa |
| elongation | 断裂,模压成型4 | ASTM D638 | 640 % |
| Dart impact | 50.8um | ISO 7765-1/B | 580 g |
| tensile strength | 屈服,模压成型4 | ASTM D638 | 8.39 Mpa |
| optical performance | Test Condition | Test Method | STYRON US/1410 |
|---|---|---|---|
| gloss | 45°,50.8µm | ASTM D2457 | 65 |
| Haze ratio | 50.8µm | ISO 14782 | 5.8 % |
| 50.8µm | ASTM D1003 | 5.8 % |
| physical property | Test Condition | Test Method | STYRON US/1410 |
|---|---|---|---|
| Content of comonomer | 内部方法 | 9.7 % | |
| melt mass-flow rate | 190°C/2.16kg | ASTMD1238 | 1.5 g/10min |
| Thermal performance | Test Condition | Test Method | STYRON US/1410 |
|---|---|---|---|
| melting temperature | 内部方法 | 97.8 °C | |
| vicat | ASTM D-1525 | 81.1 ℃ | |
| ISO 306 | 81.1 ℃ | ||
| melting temperature | Internal Method | 97.8 ℃ | |
| vicat | ASTMD1525 | 81.1 °C |
Contact Us
Get App
Top