Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
EHMWPE Quadrant EPP Quicksilver® Premium Truck Lining Mitsubishi Chemical Advanced Materials
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256A | 无断裂 |
| Supplementary Information | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| limiting pv value | 内部方法 | 0.0701 MPa·m/s |
| hardness | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 66 |
| Mechanical properties | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| tensile strength | 极限 | ASTM D638 | 30.3 MPa |
| elongation | 断裂 | ASTM D638 | 230 % |
| bending strength | 屈服 | ASTM D790 | 24.1 MPa |
| Flexural modulus | ASTM D790 | 455 MPa | |
| Compression Modulus | ASTM D695 | 552 MPa | |
| Tensile modulus | ASTM D638 | 483 MPa | |
| wear resistance | ASTM D4020 | 10 | |
| compressive strength | 10%应变,23°C | ASTM D695 | 20.7 MPa |
| coefficient of friction | 与钢-静态 | 内部方法 | 0.090 |
| shear strength | ASTM D732 | 33.1 MPa |
| Electrical performance | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| Dissipation Factor | 1MHz | ASTM D150 | 5E-04 |
| Surface Resistivity | ASTM D257 | >1.0E+13 ohms | |
| dielectric constant | 1MHz | ASTM D150 | 2.30 |
| flammability | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D570 | <0.010 % |
| 24hr | ASTM D570 | <0.010 % | |
| density | ASTM D792 | 0.930 g/cm³ |
| Thermal performance | Test Condition | Test Method | Mitsubishi Chemical Advanced Materials/Quadrant EPP Quicksilver® Premium Truck Lining |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 46.7 °C |
| Crystallization peak temperature | DSC | ASTM D3418 | 135 °C |
| Maximum operating temperature LongTerm, Air | 82 °C | ||
| Linear coefficient of thermal expansion | MD3：-40到149°C | ASTME831 | 2E-04 cm/cm/°C |
Contact Us
Get App
Top