Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS 7340A4 HD9000 JAPAN POLYPLASTIC
DURAFIDE®
Automotive Applications
Lubricity、 lubricity、Filler: Carbon glass mine、45% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| melt viscosity | 310℃,1000/sec | ISO 11443 | 340 Pa·s |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| ColorNumber | HD9000 |
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| Rockwell hardness | M计秤 | ISO 2039-2 | 100 |
| Basic performance | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| Water absorption rate | 23℃,水中24小时 | ISO 62 | 0.03 % |
| density | ISO 1183 | 1.69 g/cm |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+02 ohms·cm | |
| IEC 60093 | 100 Ω·cm | ||
| Surface Resistivity | IEC 60093 | 90 Ω |
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| bending strength | ISO 178 | 195 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 1.5 % |
| Flexural modulus | ISO 178 | 12000 Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 5.0 KJ/m | |
| tensile strength | ISO 527-2 | 135 Mpa | |
| ISO 527-1 | 135 Mpa | ||
| fracture strain | ISO 527-1 | 1.5 % |
| processability | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| Shrinkage rate | 垂直方向，80℃×2mmt | - | 0.7 % |
| 流动方向，80℃×2mmt | ISO 11359-2 | 0.3 % |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | V-0 |
| Filling analysis | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| melt viscosity | 310°C,1000sec^-1 | ISO 11443 | 340000 mPa·s |
| physical property | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.030 % |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/7340A4 HD9000 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD | 内部方法 | 4E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa，HDT | ISO 75-1 | 265 °C |
| Linear coefficient of thermal expansion | 流动方向 | ISO 11359-2 | 2 |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 265 °C |
| Linear coefficient of thermal expansion | MD | 内部方法 | 2E-05 cm/cm/°C |
| 垂直方向 | - | 4 |
Contact Us
Get App
Top