Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBI (T Series) TF-60V PBI USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | PBI USA/(T Series) TF-60V |
|---|---|---|---|
| Rockwell hardness | A计秤 | ASTM D785 | 30 |
| Supplementary Information | Test Condition | Test Method | PBI USA/(T Series) TF-60V |
|---|---|---|---|
| Initial weightlessness temperature | Nitrogen | 内部方法 | 635 °C |
| Air | 内部方法 | 607 °C |
| Mechanical properties | Test Condition | Test Method | PBI USA/(T Series) TF-60V |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.4 % |
| tensile strength | ASTM D638 | 152 MPa | |
| compressive strength | ASTM D695 | 221 MPa | |
| Tensile modulus | ASTM D638 | 12100 MPa | |
| Flexural modulus | ASTM D790 | 12500 MPa | |
| Compression Modulus | ASTM D695 | 3650 MPa | |
| bending strength | ASTM D790 | 225 MPa | |
| Poisson's ratio | 0.34 |
| Electrical performance | Test Condition | Test Method | PBI USA/(T Series) TF-60V |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 0.0 |
| dielectric constant | 10kHz | ASTM D150 | 3.90 |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 16 kV/mm | |
| dielectric constant | 1kHz | ASTM D150 | 3.90 |
| Dissipation Factor | 10kHz | ASTM D150 | 1E-03 |
| arc resistance | ASTM D495 | 180 sec |
| physical property | Test Condition | Test Method | PBI USA/(T Series) TF-60V |
|---|---|---|---|
| density | 1.52 g/cm³ | ||
| Water absorption rate | 平衡 | ASTM D570 | 4.6 % |
| 23°C,24hr | ASTM D570 | 0.25 % |
| Thermal performance | Test Condition | Test Method | PBI USA/(T Series) TF-60V |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 310 °C |
| thermal conductivity | 24°C | ASTMF433 | 0.36 W/m/K |
| HeatCapacity | 70°C | DSC | 1130 J/kg/°C |
| Linear coefficient of thermal expansion | MD：24到149°C | TMA | 1.6E-05 cm/cm/°C |
Contact Us
Get App
Top