Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE LD1403AA Ineos
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos/LD1403AA |
|---|---|---|---|
| melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 0.2 g/10min |
| density | ISO 1183/D | 0.923 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Ineos/LD1403AA |
|---|---|---|---|
| Tensile stress | 200℃，100um，Blown Film，MD | ISO 527-3 | 22 MPa |
| elongation at break | 200℃，100um，Blown Film，MD | ISO 527-3 | 280 % |
| film thickness | ASTM D-1894 | 100 um | |
| Tensile modulus | 200℃，100um，Blown Film | ISO 527-3 | 200 MPa |
| coefficient of friction | Blown Film | ASTM D-1894 | 0.5 |
| Tensile stress | 200℃，100um，Blown Film，MD，屈服 | ISO 527-3 | 12 MPa |
| elongation at break | 200℃，100um，Blown Film，TD | ISO 527-3 | 500 % |
| Tensile stress | 200℃，100um，Blown Film，TD | ISO 527-3 | 20 MPa |
| 200℃，100um，Blown Film，TD，屈服 | ISO 527-3 | 11 MPa | |
| Dart impact | 200℃，100um，Blown Film | ASTM D-1709 | 420 g |
| optical performance | Test Condition | Test Method | Ineos/LD1403AA |
|---|---|---|---|
| gloss | 45°，100um， Blown Film | ASTM D-2457 | 45 |
| Haze ratio | 100um，Blown Film | ASTM D-1003 | 9 % |
| processability | Test Condition | Test Method | Ineos/LD1403AA |
|---|---|---|---|
| Melt Temperature | ASTM D-1709 | 170-220 ℃ |
| Thermal performance | Test Condition | Test Method | Ineos/LD1403AA |
|---|---|---|---|
| vicat | ISO 306/A50 | 97 ℃ |
Contact Us
Get App
Top