Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS ElectriPlast® EP-CF/ABS Integral Technologies, Inc.
--
--
Filler, nickel plated carbon fiber
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/ABS |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 51 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 150 J/m |
| Mechanical properties | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/ABS |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.0 % |
| Tensile modulus | ASTM D638 | 7100 MPa | |
| tensile strength | 断裂 | ASTM D638 | 70.0 MPa |
| Flexural modulus | ASTM D790 | 6030 MPa | |
| bending strength | ASTM D790 | 112 MPa |
| Electrical performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/ABS |
|---|---|---|---|
| Surface Resistivity | ESDSTM11.11 | 1E+02 ohms | |
| Volume resistivity | ASTM D257 | 21 ohms·cm | |
| ESDSTM11.11 | 10 ohms | ||
| StaticDecay | 内部方法 | 10 msec |
| flammability | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/ABS |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| burning rate | UL 94 | 29 mm/min |
| physical property | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/ABS |
|---|---|---|---|
| density | ASTM D792 | 1.14 g/cm³ |
| Thermal performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/ABS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 96.0 °C |
Contact Us
Get App
Top