Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS FR2000 COVESTRO GERMANY
Bayblend®
Electrical field、Electronic field、Automotive sector
High mobility、Flame retardant、Processability、Light resistance
UL
SGS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 105 |
| Mechanical properties | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 10 kg·cm/cm(J/M)ft·lb/in | |
| elongation | 断裂 | ASTM D638 | 9.0 % |
| tensile strength | 断裂 | ASTM D638 | 24.1 Mpa |
| Tensile modulus | ASTM D638/ISO 527 | 2700 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | >50 % | |
| Flexural modulus | ASTM D790 | 1070 Mpa | |
| tensile strength | ASTM D638/ISO 527 | 60 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| dielectric constant | ASTM D150/IEC 60250 | 3.1 |
| other | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| notes | 注射.阻燃 |
| Physical properties | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.4-0.6 % | |
| density | ASTM D792/ISO 1183 | 1.18 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 26 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.5 % |
| flammability | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.050 % |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 1.7 % |
| Thermal performance | Test Condition | Test Method | COVESTRO GERMANY/FR2000 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 82.2 °C |
| vicat | ASTM D1525/ISO R306 | 92 ℃（℉） | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.76 mm/mm.℃ |
Contact Us
Get App
Top