Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS DP M203FC Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/DP M203FC |
|---|---|---|---|
| density | ISO 1183 | 1050 kg/m | |
| Melt volume flow rate | 220℃,10kg | ISO 1133 | 31.0 cm |
| Electrical performance | Test Condition | Test Method | Ineos ABS/DP M203FC |
|---|---|---|---|
| relative permittivity | 1000Hz | IEC 60250 | 3.00 |
| dielectric strength | IEC 60243-1 | 32 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.20 |
| Volume resistivity | IEC 60093 | 1E+13 ohm.m | |
| Dielectric loss | 100Hz | IEC 60250 | 0.0080 |
| 1000Hz | IEC 60250 | 0.015 |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/DP M203FC |
|---|---|---|---|
| Tensile strain | 屈服 | ISO 527-1 | 2.2 % |
| Tensile modulus | ISO 527-1 | 2600 MPa | |
| Tensile stress | 屈服 | ISO 527-1 | 44.0 MPa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 16.0 KJ/m |
| -30℃ | ISO 179/1eA | 6.00 KJ/m | |
| 23℃ | ISO 179/1eU | 90.0 KJ/m | |
| -30℃ | ISO 179/1eU | 80.0 KJ/m | |
| fracture strain | ISO 527-1 | 0.00 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/DP M203FC |
|---|---|---|---|
| vicat | 50℃/h 50N | ISO 306 | 97.0 ℃ |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000085 cm/cm℃ | |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 98.0 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 94.0 ℃ |
Contact Us
Get App
Top