Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PPS Z-230 BK DIC JAPAN

DIC.PPS

Fitness equipment、Automotive sector、Household appliances、Electronic field、Electrical field

Glass fiber reinforced、High temperature resistan、Filler: Glass fiber reinf、30% filler by weight

Plastic Datasheets

Impact resistance	Test Condition	Test Method	DIC JAPAN/Z-230 BK
Suspended wall beam without notch impact strength		ASTM D256	750 J/m

hardness	Test Condition	Test Method	DIC JAPAN/Z-230 BK
Rockwell hardness	R级	ASTM D785	118

Electrical performance	Test Condition	Test Method	DIC JAPAN/Z-230 BK
Volume resistivity		ASTM D257	1E+16 ohms·cm
Dissipation Factor	1MHz	ASTM D150	5E-03
dielectric constant	1MHz	ASTM D150	5.00
dielectric strength	1.60mm	ASTM D149	16 KV/mm

Mechanical properties	Test Condition	Test Method	DIC JAPAN/Z-230 BK
elongation at break		ASTM D790	3.2 %
Tensile modulus		ASTM D638	9300 Mpa
elongation	断裂	ASTM D638	2.4 %
bending strength		ASTM D790	220 Mpa
Poisson's ratio			0.36
Flexural modulus		ASTM D790	8500 Mpa
compressive strength		ASTM D695	150 Mpa
tensile strength		ASTM D638	155 Mpa

flammability	Test Condition	Test Method	DIC JAPAN/Z-230 BK
UL flame retardant rating	1.6mm	UL 94	V-0

physical property	Test Condition	Test Method	DIC JAPAN/Z-230 BK
Shrinkage rate	MD	ASTM D955	0.30 %
Water absorption rate	23°C,24hr	ASTM D570	0.020 %
Shrinkage rate	TD	ASTM D955	1.2 %

Thermal performance	Test Condition	Test Method	DIC JAPAN/Z-230 BK
Heat distortion temperature	1.8MPa,未退火，HDT	ASTM D648	255 °C
Linear coefficient of thermal expansion	TD:-30到100°C	ASTM D696	2.2E-05 cm/cm/°C
Linear coefficient of thermal expansion		MD:-30到100°C	ASTM D696	2.2E-05 cm/cm/°C

Get App

Top