plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA66 A30SFN31 LANXESS GERMANY

Durethan®

Electronic field,Electrical field,Automotive sector

Flame retardant,High mobility

UL

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	LANXESS GERMANY/A30SFN31
Linear coefficient of thermal expansion	MD：23~55℃MD：23 to 55℃	ISO 11359-2	0.000080 1/℃
Linear coefficient of thermal expansion		TD：23~55℃TD：23 to 55℃	ISO 11359-2	0.000070 1/℃
Melting temperature		ISO 11357-3	265 °C
Vicat softening temperature	B120B120	ISO 306/B120	230 °C

mechanical properties	Test Condition	Test Method	LANXESS GERMANY/A30SFN31
Bending modulus	23℃23℃4	ISO 178-A	3700 Mpa
Bending strain	23°C		5.8 %
bending strength	23℃23°C	ISO 178	125 Mpa
bending strength		3.50% Strain3.5% Strain	ISO 178-A	120 Mpa
Tensile modulus	23℃23℃	ISO 527-1-2	3800 Mpa
Tensile strain	Yield，23℃Yield，23℃	ISO 527-2/50	4.1 %
tensile strength	Yield，23℃Yield，23℃	ISO 527-2/50	85 Mpa

flame retardant performance	Test Condition	Test Method	LANXESS GERMANY/A30SFN31
0.40 mm??0.40 mm	0.40mm	UL 94	V-0
Glow wire combustion index (GWFI)	0.40 mm0.40 mm	IEC 60695-2-12	960 °C
Ignition temperature of heating wire	0.4 mm0.40 mm	IEC 60695-2-13	775 °C
Ultimate Oxygen Index		ISO 4589-2	34 %

Electrical performance	Test Condition	Test Method	LANXESS GERMANY/A30SFN31
Compared to the anti leakage trace index	Solution ASolution A	IEC 60112	PLC 0
Dielectric strength	23 ℃，1 mm23℃，1.00 mm	IEC 60243-1	30 KV/mm
Dissipation factor	23℃，100 Hz23°C, 100 Hz	IEC 60250	0.012
Dissipation factor		23℃，1 MHz23°C, 1 MHz	IEC 60250	0.019
Relative permittivity	23℃，1 MHz23°C, 1 MHz	IEC 60250	4
Relative permittivity		23℃，100 Hz23°C, 100 Hz	IEC 60250	4
Surface resistivity		IEC 60093	1000000000000000 ohms
Volume resistivity	23℃23℃	IEC 60093	100000000000000 ohms·cm

Physical properties	Test Condition	Test Method	LANXESS GERMANY/A30SFN31
density	23°C	ISO 1183	1.17 g/cm³
Shrinkage rate	MD：270℃，2.0 mmFlow : 518°F, 0.0787 in 22	ISO 294-4	1.1 %
		MD：120℃，2.0 mm，2 hrsFlow : 120°C, 2 hr, 2.00 mm 33	ISO 294-4	0.1 %
		TD：120℃，2.0 mm，2 hrsAcross Flow : 120°C, 2 hr, 2.00 mm 33	ISO 294-4	0.1 %
		TD：270℃，2.0 mmAcross Flow : 518°F, 0.0787 in 22	ISO 294-4	1.1 %

impact performance	Test Condition	Test Method	LANXESS GERMANY/A30SFN31
Impact strength of cantilever beam gap	23℃23℃	ISO 180-1A	< 10 kJ/m²
Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	60 kJ/m²
Impact strength of simply supported beam without notch		-30℃-30°C	ISO 179/1eU	50 kJ/m²
Suspended wall beam without notch impact strength	23℃23°C	ISO 180/1U	55 kJ/m²
Suspended wall beam without notch impact strength		-30℃-30°C	ISO 180/1U	55 kJ/m²

Contact Us

Get App

Top