Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PET HX8300HP SABIC INNOVATIVE US
XYLEX™
Automotive Applications、Electronic and electrical
Flame retardant、High heat resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Dart impact | 23°C, Total Energy | ASTM D3763 | 95.0 J |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Shore hardness | 邵氏 D, 10 秒 | ASTM D2240 | 73 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Tensile modulus | --2 | ASTM D638 | 1520 Mpa |
| tensile strength | 屈服3 | ASTM D638 | 47.0 Mpa |
| elongation | 断裂3 | ASTM D638 | 150 % |
| 断裂 | ISO 527-2/50 | > 200 % | |
| Flexural modulus | --5 | ISO 178 | 1700 Mpa |
| bending strength | 屈服, 50.0 mm 跨距4 | ASTM D790 | 71.0 Mpa |
| --5,6 | ISO 178 | 78.0 Mpa | |
| Flexural modulus | 50.0 mm 跨距4 | ASTM D790 | 1680 Mpa |
| tensile strength | 断裂 | ISO 527-2/50 | 54.0 Mpa |
| 屈服 | ISO 527-2/50 | 55.0 Mpa | |
| elongation | 屈服 | ISO 527-2/50 | 5.0 % |
| 屈服3 | ASTM D638 | 5.0 % | |
| tensile strength | 断裂3 | ASTM D638 | 46.0 Mpa |
| Tensile modulus | -- | ISO 527-2/1 | 1600 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Volume resistivity | ASTM D257 | > 1.0E+15 ohms·cm | |
| Surface Resistivity | ASTM D257 | > 1.0E+15 ohms | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 0 |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| transmissivity | 2540 µm | ASTM D1003 | 88.0 % |
| refractive index | ISO 489 | 1.539 | |
| Haze ratio | 2540 µm | ASTM D1003 | < 2.0 % |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Burning wire flammability index | 1.0 mm | IEC 60695-2-12 | 750 °C |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.15 % |
| Shrinkage rate | 横向流动 : 3.20 mm | 内部方法 | 0.40 - 0.60 % |
| Melt volume flow rate | 265°C/2.16 kg | ISO 1133 | 15.0 cm3/10min |
| melt mass-flow rate | 265°C/2.16 kg | ASTM D1238 | 15 g/10 min |
| Shrinkage rate | 流动 : 3.20 mm | 内部方法 | 0.50 - 0.80 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.49 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 1.1E-4 cm/cm/°C |
| thermal conductivity | ISO 8302 | 0.23 W/m/K | |
| Heat distortion temperature | 1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距9，HDT | ISO 75-2/Ae | 80.0 °C |
| vicat | -- | ASTM D152510 | 96.0 °C |
| Linear coefficient of thermal expansion | 流动 : 23 到 60°C | ISO 11359-2 | 9.0E-5 cm/cm/°C |
| 横向 : 23 到 60°C | ISO 11359-2 | 9.0E-5 cm/cm/°C | |
| ball-indentation hardness | 85°C | IEC 60695-10-2 | 通过 |
| Linear coefficient of thermal expansion | 横向 : -40°C | ISO 11359-2 | 1.1E-4 cm/cm/°C |
| vicat | -- | ISO 306/B50 | 92.0 °C |
| Heat distortion temperature | 0.45 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 79.0 °C |
| Linear coefficient of thermal expansion | 横向 : -40 到 40°C | ASTM E831 | 1.1E-4 cm/cm/°C |
| Heat distortion temperature | 1.8 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 75.0 °C |
| injection | Test Condition | Test Method | SABIC INNOVATIVE US/HX8300HP |
|---|---|---|---|
| screw speed | 20 to 100 rpm | ||
| Suggested maximum moisture content | 0.020 % | ||
| Processing (melt) temperature | 245 to 265 °C | ||
| drying temperature | 65 to 75 °C | ||
| Suggested injection volume | 40 to 80 % | ||
| drying time | 3.0 to 5.0 hr | ||
| Temperature in the middle of the barrel | 240 to 260 °C | ||
| Temperature at the rear of the barrel | 240 to 250 °C | ||
| Exhaust hole depth | 0.013 to 0.020 mm | ||
| Temperature at the front of the material cylinder | 245 to 265 °C | ||
| Back pressure | 0.200 to 0.500 Mpa | ||
| Temperature | 45 to 60 °C | ||
| Spray nozzle temperature | 245 to 265 °C |
Contact Us
Get App
Top