Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 A3GK30 AKRO-PLASTIC GERMANY
AKROMID®
Shell,Household appliances,Electronic field,Electrical field,Electrical appliances
Excellent appearance,Glass bead reinforcement,Low warpage,enhance,Filler: Glass beads,30%,Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
ReinforcementContent | ISO 1172 | 30 % |
thermal performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 225 °C |
1.8MPa,Unannealed | ISO 75-2/A | 100 °C | |
Melting temperature | DIN EN11357-1 | 262 °C |
mechanical properties | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
Bending modulus | ISO 178 | 4300 Mpa | |
bending strength | ISO 178 | 140 Mpa | |
Fracture bending strain | ISO 178 | 6.5 % | |
Tensile modulus | ISO 527-2/1 | 5000 Mpa | |
Tensile strain | Break | ISO 527-2/5 | 4.0 % |
tensile strength | Break | ISO 527-2/5 | 90.0 Mpa |
Electrical performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
Compared to the anti leakage trace index | SolutionA | IEC 60112 | PLC 1 |
Surface resistivity | IEC 60093 | 1E+13 ohms | |
Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
Hygroscopicity | 70°C,62%RH | ISO 1110 | 2.0 % |
Shrinkage rate | MD | ISO 294-4 | 1.2 % |
TD | ISO 294-4 | 1.3 % | |
Water absorption rate | Saturation,23°C | ISO 62 | 5.8 % |
impact performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 22 kJ/m² |
23°C | ISO 179/1eU | 28 kJ/m² |
flammability | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3GK30 |
---|---|---|---|
Burning rate | 1.00mm | FMVSS302 | <100 mm/min |
Burning wire flammability index | 1.6mm | IEC 60695-2-12 | 650 °C |
UL flame retardant rating | 1.6mm | UL 94 | HB |