Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA12 L2101F EVONIK GERMANY
VESTAMID®
Cable sheath,Automotive Applications
Low temperature impact re,Resistance to stress crac,Fatigue resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| Electrolytic corrosion | IEC 60426 | A1 | |
| ISO Shortcut | ISO 1874 | PA12.F.22-010 |
| thermal performance | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 110 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 50.0 °C | |
| Linear coefficient of thermal expansion | MD:23to55°C | ISO 11359-2 | 1.5E-04 cm/cm/°C |
| Melting temperature | ISO 11357-3 | 178 °C | |
| Vicat softening temperature | -- | ISO 306/B | 140 °C |
| -- | ISO 306/A | 170 °C |
| mechanical properties | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 1400 Mpa | |
| Tensile strain | Yield | ISO 527-2 | 5.0 % |
| Break | ISO 527-2 | >50 % | |
| tensile strength | Yield | ISO 527-2 | 45.0 Mpa |
| Electrical performance | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| Compared to the anti leakage trace index | SolutionA3 | IEC 60112 | V |
| -- | IEC 60112 | V | |
| Dielectric strength | IEC 60243-1 | 29 KV/mm | |
| Dissipation factor | 23°C,100Hz | IEC 60250 | 0.045 |
| 23°C,1MHz | IEC 60250 | 0.028 | |
| Relative permittivity | 23°C,1MHz | IEC 60250 | 3.00 |
| 23°C,100Hz | IEC 60250 | 3.70 | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.01 g/cm³ |
| Shrinkage rate | MD | ISO 294-4 | 0.70 % |
| TD | ISO 294-4 | 1.3 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.80 % |
| Saturation,23°C | ISO 62 | 1.6 % |
| impact performance | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C,Complete Break | ISO 179/1eA | 9.0 kJ/m² |
| 23°C,Complete Break | ISO 179/1eA | 32 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| 23°C | ISO 179/1eU | NoBreak |
| flammability | Test Condition | Test Method | EVONIK GERMANY/L2101F |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| 1.6mm | UL 94 | HB |