LCP E6007LHF-Z LCP vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

LCP SUMITOMO JAPAN E6007LHF-Z

Injection grade

US$ 9,950 / MT

FOB Guangzhou port, China

injection	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Back pressure			1.00 to 5.00 Mpa
Injection speed			中等偏快
Temperature at the front of the material cylinder			340 to 360 °C
Spray nozzle temperature			340 to 360 °C
Screw speed			50 to 100 rpm
Mold temperature			40 to 160 °C
Processing (melt) temperature			350 °C
drying temperature			130 °C
Injection pressure			80.0 to 160 Mpa
Maintain pressure			20.0 to 40.0 Mpa
Temperature in the middle of the barrel			320 to 340 °C
drying time			4.0 to 24 hr
Temperature at the rear of the barrel			280 to 320 °C
mechanical properties	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
elongation	Break	ASTM D638	5.1 %
Bending modulus	23°C	ASTM D790	11800 Mpa
tensile strength		ASTM D638	157 Mpa
bending strength	23°C	ASTM D790	158 Mpa
impact performance	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Suspended wall beam without notch impact strength	6.40 mm	ASTM D256	250 J/m
Physical properties	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Shrinkage rate	Flow	Internal Method	0.20 %
Shrinkage rate		横向Flow	Internal Method	0.60 %
Water absorption rate	Saturation	ASTM D570	0.020 %
flammability	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Extreme Oxygen Index		ISO 527-1	40 %
Solder resistance		Internal Method	300 °C
UL flame retardant rating	0.30 mm	UL 94	V-0
Electrical performance	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Dissipation factor	1.00 GHz	ASTM D150	4.0E-3
Dielectric constant	1.00 GHz	ASTM D150	3.50
Volume resistivity		ASTM D257	1.0E+15 ohms·cm
Dissipation factor	1 MHz	ASTM D150	0.026
Arc resistance		ASTM D495	124 sec
Dielectric constant	1 MHz	ASTM D150	3.80
thermal performance	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Linear coefficient of thermal expansion	Flow : 150°C	Internal Method	2.0E-6 cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed	ASTM D648	269 °C
Linear coefficient of thermal expansion	Across Flow : 150°C	Internal Method	8.5E-5 cm/cm/°C
other	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
purpose			IT办公
hardness	Test Condition	Test Method	SUMITOMO JAPAN/E6007LHF-Z
Rockwell hardness	R-Scale	ASTM D785	106

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index