PC HF500R-73243 PC vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PC SABIC INNOVATIVE US HF500R-73243

Injection grade

US$ 2,590 / MT

FOB Guangzhou port, China

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
bending strength		ISO 178	95.0 Mpa
Tensile strain	Break	ISO 527-2/5	7.0 %
Tensile modulus		ISO 527-2/1	3300 Mpa
Taber abraser	1000Cycles,1000g,CS-17Wheel	Internal Method	11.0 mg
tensile strength	Break	ISO 527-2/5	45.0 Mpa
tensile strength		Yield	ISO 527-2/5	60.0 Mpa
Bending modulus		ISO 178	3400 Mpa
Tensile strain	Yield	ISO 527-2/5	5.0 %
flammability	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
Burning wire flammability index	1.00mm	IEC 60695-2-12	960 °C
Extreme Oxygen Index		ISO 4589-2	35 %
UL flame retardant rating	1.50mm	UL 94	V-0
impact performance	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	7.0 kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	8.0 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch		-30°C	ISO 179/1eU	无断裂
Charpy Notched Impact Strength	23°C	ISO 179/1eA	8.0 kJ/m²
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	7.0 kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	110 kJ/m²
Suspended wall beam without notch impact strength		23°C	ISO 180/1U	无断裂
Physical properties	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
Shrinkage rate	MD1	Internal Method	0.20-0.60 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.13 %
Water absorption rate		Saturation,23°C	ISO 62	0.31 %
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	16.0 cm3/10min
Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
Dissipation factor	50Hz	IEC 60250	1E-03
Relative permittivity	50Hz	IEC 60250	2.90
Dielectric strength	3.20mm,in Oil	IEC 60243-1	16 KV/mm
Compared to the anti leakage trace index		IEC 60112	PLC 3
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm
Dissipation factor	1MHz	IEC 60250	0.010
Dissipation factor		60Hz	IEC 60250	1E-03
Dielectric strength	1.60mm,in Oil	IEC 60243-1	25 KV/mm
Surface resistivity		IEC 60093	>1.0E+15 ohms
Dielectric strength	0.800mm,in Oil	IEC 60243-1	33 KV/mm
Relative permittivity	1MHz	IEC 60250	2.80
Relative permittivity		60Hz	IEC 60250	2.90
thermal performance	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
Linear coefficient of thermal expansion	MD：23to80°C	ISO 11359-2	4E-05 cm/cm/°C
RTI Elec		UL 746	130 °C
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
RTI Imp		UL 746	125 °C
1.8MPa, unannealed, 100mm span		ISO 75-2/Ae	132 °C
RTI		UL 746	125 °C
thermal conductivity		ISO 8302	0.21 W/m/K
0.45MPa, unannealed, 100mm span		ISO 75-2/Be	140 °C
hardness	Test Condition	Test Method	SABIC INNOVATIVE US/HF500R-73243
Ball Pressure Test	H358/30	ISO 2039-1	115 Mpa

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index