plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
AS(SAN) Luran® 388S INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodINEOS Barex/Luran® 388S
Ball Pressure TestISO 2039-1175 MPa
Rockwell hardnessM-Scale86
thermal performanceTest ConditionTest MethodINEOS Barex/Luran® 388S
Hot deformation temperature1.8MPa,AnnealedISO 75-2/A90.0 °C
0.45MPa,AnnealedISO 75-2/B102 °C
Linear coefficient of thermal expansionMDISO 11359-27E-05 cm/cm/°C
thermal conductivityDIN 526120.17 W/m/K
Vicat softening temperatureISO 306/B50107 °C
mechanical propertiesTest ConditionTest MethodINEOS Barex/Luran® 388S
bending strengthISO 178140 MPa
Tensile creep modulus1000hrISO 899-12800 MPa
1hrISO 899-13500 MPa
Tensile modulusISO 527-23800 MPa
Tensile strainBreak,23°CISO 527-24.0 %
tensile strengthYield,23°CISO 527-279.0 MPa
Electrical performanceTest ConditionTest MethodINEOS Barex/Luran® 388S
Dielectric constant100HzIEC 602503.00
Dissipation factor1MHzIEC 602508E-03
100HzIEC 602505E-03
Surface resistivityIEC 60093>1.0E+15 ohms
Volume resistivityIEC 600931E+16 ohms·cm
Physical propertiesTest ConditionTest MethodINEOS Barex/Luran® 388S
Apparent density0.65 g/cm³
densityISO 11831.08 g/cm³
Melt Volume Flow Rate (MVR)220°C/10.0kgISO 11337.00 cm³/10min
Shrinkage rateISO 294-40.30to0.70 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.30 %
impact performanceTest ConditionTest MethodINEOS Barex/Luran® 388S
Charpy Notched Impact Strength23°CISO 1792.5 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/A2.5 kJ/m²
23°CISO 180/A2.5 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 17919 kJ/m²
23°CISO 17921 kJ/m²
optical performanceTest ConditionTest MethodINEOS Barex/Luran® 388S
Refractive indexISO 4891.560
transmissivity550nmASTM D1003>89.0 %
turbidityASTM D1003<1.0 %

Contact Us

Get App

Top