Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAS RTP 1600.5 L MG 15 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1600.5 L MG 15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 48 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 480 J/m |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1600.5 L MG 15 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| tensile strength | ASTM D638 | 72.4 MPa | |
| Flexural modulus | ASTM D790 | 3790 MPa | |
| Tensile modulus | ASTM D638 | 4830 MPa | |
| bending strength | ASTM D790 | 124 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 1600.5 L MG 15 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 15 kV/mm |
| flammability | Test Condition | Test Method | RTP US/RTP 1600.5 L MG 15 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 1600.5 L MG 15 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.40 % |
| density | ASTM D792 | 1.51 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 1600.5 L MG 15 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 207 °C |
Contact Us
Get App
Top