Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 G5000HSL NC01 INVISTA ARGENTINA
INVISTA™ 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodINVISTA ARGENTINA/G5000HSL NC01
Impact strength of cantilever beam gap23°CISO 18013 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179100 kJ/m²
23°CISO 179130 kJ/m²
thermal performanceTest ConditionTest MethodINVISTA ARGENTINA/G5000HSL NC01
Heat Deflection Temperature0.45 MPa, 未退火ISO 75-2/B260 °C
1.8 MPa, 未退火ISO 75-2/A255 °C
melting temperatureISO 11357-3262 °C
mechanical propertiesTest ConditionTest MethodINVISTA ARGENTINA/G5000HSL NC01
bending strengthISO 178350 Mpa
flexural modulusISO 17816700 Mpa
Tensile modulusISO 527-216900 Mpa
Tensile strain (fracture)ISO 527-22.4 %
Tensile stress (fracture)ISO 527-2247 Mpa
Physical propertiesTest ConditionTest MethodINVISTA ARGENTINA/G5000HSL NC01
melt mass-flow rate280°C/5.0 kgASTM D12382.3 g/10 min
shrinkage rate垂直流动方向 : 2.00 mmISO 294-40.80 - 0.90 %
流动方向 : 2.00 mmISO 294-40.20 - 0.30 %
Water absorption rate平衡, 23°C, 50% RHISO 621.1 %
23°C, 24 hrISO 620.65 %
injectionTest ConditionTest MethodINVISTA ARGENTINA/G5000HSL NC01
Back pressure0.200 to 1.00 Mpa
cushion layer4.00 to 6.00 mm
drying temperature80 °C
drying time3.0 to 4.0 hr
Exhaust hole depth7.0E-3 - 0.040 mm
mold temperature50.0 to 90.0 °C
Processing (melt) temperature280 to 300 °C
Spray nozzle temperature270 to 290 °C
Suggested maximum moisture content0.080 to 0.18 %
Temperature at the front of the material cylinder270 to 290 °C
Temperature at the rear of the barrel250 to 270 °C
Temperature in the middle of the barrel270 to 290 °C

Contact Us

Get App

Top