Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MPR 4670 NC USA Advanced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodUSA Advanced/ 4670 NC
DurometerHardnessShoreA,1.91mm,CompressionMoldedASTM D224070
IRHD hardnessISO 4870
Mechanical propertiesTest ConditionTest MethodUSA Advanced/ 4670 NC
Tensile strainBreak,1.91mm,CompressionMoldedASTM D638440 %
Tensile modulus1.91mm,CompressionMoldedASTM D6383.93 MPa
1.91mm,CompressionMoldedISO 527-23.93 MPa
tensile strength Yield,1.91mm,CompressionMoldedASTM D6388.83 MPa
Taber abraser1000Cycles,1000g,CS-17转轮ASTM D10444.00 mg
Tensile strainBreak,1.91mm,CompressionMoldedISO 527-2440 %
tensile strength Yield,1.91mm,CompressionMoldedISO 527-28.83 MPa
agingTest ConditionTest MethodUSA Advanced/ 4670 NC
volume change100°C,168hr,inASTM#3OilASTM D47117 %
24°C,168hr,inReferenceFuelBASTM D47116 %
Hardness change rate in the air125°C,168hrASTM D47164
elongation at break125°C,168hrASTM D471380 %
volume change100°C,168hr,在水中ASTM D47111 %
100°C,168hr,inASTM#1OilASTM D471-17 %
Shore hardness125°C,168hrISO 18864
elastomerTest ConditionTest MethodUSA Advanced/ 4670 NC
compression set100°C,22hrASTM D395B74 %
Clash Mountain Module-20°CASTM D104368.9 MPa
compression set24°C,22hrISO 81521 %
tear strength24°CASTM D62438.5 kN/m
Stretch permanent deformationASTM D4129 %
compression set24°C,22hrASTM D395B21 %
100°C,22hrISO 81574 %
physical property Test ConditionTest MethodUSA Advanced/ 4670 NC
densityASTM D7921.25 g/cm³
ISO 11831.25 g/cm³
Thermal performanceTest ConditionTest MethodUSA Advanced/ 4670 NC
brittle temperatureISO 974-60.0 °C
ASTM D746-60.0 °C

Contact Us

Get App

Top