Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS 6165A7 HF2000 JAPAN POLYPLASTIC
DURAFIDE®
Fiber grade
Oil resistant,Dimensional stability,Flame retardant,Glass fiber reinforced,High temperature resistan,Fuel resistant,Filler: Glass mineral,65% filler by weight,65% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 HF2000 |
|---|---|---|---|
| density | ISO 1183 | 1.98 | |
| Melt viscosity | ISO 11443 | 290 Pa.s |
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 HF2000 |
|---|---|---|---|
| Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/Af | 270 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 3E-05 cm/cm/°C |
| MD | ISO 11359-2 | 2E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 HF2000 |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 17000 Mpa |
| ISO 178 | 16600 MPa | ||
| bending strength | 23°C | ISO 178 | 205 Mpa |
| ISO 178 | 205 MPa | ||
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.00 kJ/m² |
| ISO 179/1eA | 4.9 KJ/m | ||
| Elongation at Break | 23°C | ISO 527-2 | 1.10 % |
| Tensile strain | Break | ISO 527-2 | 1.2 % |
| tensile strength | 23°C | ISO 527-2 | 140 Mpa |
| Tensile stress | Yield | ISO 527-2 | 140 MPa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 HF2000 |
|---|---|---|---|
| Dielectric constant | 23°C | IEC 60250 | 5.40 1kHz |
| 23°C | IEC 60250 | 5.40 1MHz |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 HF2000 |
|---|---|---|---|
| density | ISO 1183 | 1.98 g/cm³ | |
| Water absorption rate | (23°C,24hr) | ISO 62 | 0.01 % |