Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LMDPE Ravago Compounds HMP-305W (Roto) Entec Polymers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Entec Polymers/Ravago Compounds HMP-305W (Roto) |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C,RotationalMolded | ARM | 92 J |
| Supplementary Information | Test Condition | Test Method | Entec Polymers/Ravago Compounds HMP-305W (Roto) |
|---|---|---|---|
| Pourability | ASTM D1895 | 30.0 sec |
| Mechanical properties | Test Condition | Test Method | Entec Polymers/Ravago Compounds HMP-305W (Roto) |
|---|---|---|---|
| Flexural modulus | RotationalMolded，正切 | ASTM D790 | 793 MPa |
| tensile strength | Yield,RotationalMolded | ASTM D638 | 19.3 MPa |
| Tensile strain | Break,RotationalMolded | ASTM D638 | 400 % |
| flammability | Test Condition | Test Method | Entec Polymers/Ravago Compounds HMP-305W (Roto) |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Entec Polymers/Ravago Compounds HMP-305W (Roto) |
|---|---|---|---|
| Environmental stress cracking resistance | 100%Igepal,RotationalMolded,F50 | ASTM D1693B | 1000 hr |
| Apparent density | ASTM D1895 | 0.34 g/cm³ | |
| density | ASTM D792 | 0.934 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 5.0 g/10min |
| Thermal performance | Test Condition | Test Method | Entec Polymers/Ravago Compounds HMP-305W (Roto) |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,Unannealed,RotationalMolded，HDT | ASTM D648 | 42.0 °C |
| 0.45MPa,未退火,滚塑成形，HDT | ASTM D648 | 63.0 °C |
Contact Us
Get App
Top