Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM FB2025 MITSUBISHI ENGINEERING JAPAN
Iupital™
Automotive sector
high strength,enhance,filling,currency
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FB2025 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | hb | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 9 mm/mm.℃ | |
| Melting temperature | 165 ℃(℉) |
| mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FB2025 |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 3.65(3.58 kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | 83 | |
| tensile strength | ASTM D638/ISO 527 | 630(61.8) kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FB2025 |
|---|---|---|---|
| Dielectric constant | ASTM D150/IEC 60250 | 3.7(33 |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FB2025 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.59 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 5.0 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.20 % |