Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 4350 STYRON US
CALIBRE™
Application in the automo、Electrical appliances
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | STYRON US/4350 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C,3.20mm,注塑 | ASTM D256 | 无断裂 |
| Dart impact | 23°C,3.20mm,注塑,总能量 | ASTM D3763 | 87.0 J |
| hardness | Test Condition | Test Method | STYRON US/4350 |
|---|---|---|---|
| Rockwell hardness | R级,3.20mm,注塑 | ASTM D785 | 118 |
| Mechanical properties | Test Condition | Test Method | STYRON US/4350 |
|---|---|---|---|
| tensile strength | 屈服,3.20mm,注塑 | ASTM D638 | 60.0 Mpa |
| elongation | 断裂,3.20mm,注塑 | ASTM D638 | 150 % |
| 屈服,3.20mm,注塑 | ASTM D638 | 6.0 % | |
| Flexural modulus | 3.20mm,注塑 | ASTM D790 | 2410 Mpa |
| tensile strength | 断裂,3.20mm,注塑 | ASTM D638 | 71.0 Mpa |
| bending strength | 3.20mm,注塑 | ASTM D790 | 96.5 Mpa |
| Tensile modulus | 3.20mm,注塑 | ASTM D638 | 2410 Mpa |
| physical property | Test Condition | Test Method | STYRON US/4350 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50-0.70 % |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 15 g/10min |
| Thermal performance | Test Condition | Test Method | STYRON US/4350 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 127 °C |
| vicat | ASTM D15253 | 148 °C | |
| Heat distortion temperature | 1.8MPa,退火，HDT | ASTM D648 | 140 °C |
| Ball pressure temperature | IEC 60335-1 | >125 °C | |
| Linear coefficient of thermal expansion | MD：-40到82°C | ASTM D696 | 6.8E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,退火，HDT | ASTM D648 | 143 °C |
Contact Us
Get App
Top