Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DL-4020 BK8115 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Plastic bag、Electrical appliances、Electronic and Electrical
Easy to demould、wear resistant、Easy to form
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/DL-4020 BK8115 |
|---|---|---|---|
| Deflection Temperature Under Load? | 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 128 °C |
| Injection | Test Condition | Test Method | SABIC INNOVATIVE US/DL-4020 BK8115 |
|---|---|---|---|
| Suggested Max Moisture | 0.020 % | ||
| Middle Temperature | 305 到 315 °C | ||
| Processing (Melt) Temp | 300 到 315 °C | ||
| Drying Time | 4.0 hr | ||
| Rear Temperature | 295 到 305 °C | ||
| Drying Temperature | 120 °C | ||
| Front Temperature | 310 到 320 °C | ||
| Back Pressure | 0.200 到 0.300 Mpa | ||
| Mold Temperature | 80 到 110 °C | ||
| Screw Speed | 30 到 60 rpm |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/DL-4020 BK8115 |
|---|---|---|---|
| Modeling Shrinkage | 流动 : 24小时 | ASTM D955 | 0.70 到 0.90 % |
| 横向流动 : 24小时 | 0.70 到 0.90 % |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/DL-4020 BK8115 |
|---|---|---|---|
| Flexural Strength | ASTM D790 | 81.0 Mpa | |
| Specific Wear Rate | ASTM D3702 | 2.0E+7 10^-8 mm³/N·m | |
| Flexural Modulus | ASTM D790 | 2270 Mpa | |
| Coefficient of Friction | Dynamic | ASTM D3702 | 0.28 |
| Tensile Strength | 断裂 | ASTM D638 | 53.0 Mpa |
| Tensile Elongation | 53 % | ||
| Coefficient of Friction | Static | ASTM D3702 | 0.17 |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/DL-4020 BK8115 |
|---|---|---|---|
| Unnotched Izod Impact Strength | 23°C | ASTM D4812 | 无断裂 |
Contact Us
Get App
Top