Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP 210 INEOS USA
INEOS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | INEOS USA/210 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 60 |
| film | Test Condition | Test Method | INEOS USA/210 |
|---|---|---|---|
| OTr | 23°C,100%RH | ASTM D3985 | 0.31 cm³·mm/m²/atm/24hr |
| Water Vapor Transmission Rate | ASTMF1249 | 2.0 g·mm/m²/atm/24hr |
| Mechanical properties | Test Condition | Test Method | INEOS USA/210 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 3.0 % |
| bending strength | 屈服 | ASTM D790 | 96.5 Mpa |
| tensile strength | 屈服 | ASTM D638 | 65.5 Mpa |
| Flexural modulus | ASTM D790 | 3380 Mpa |
| optical performance | Test Condition | Test Method | INEOS USA/210 |
|---|---|---|---|
| transmissivity | 254µm | ASTM D1003 | 92.5 % |
| Yellowness Index | 0.254mm | ASTM D1925 | 2.5 YI |
| gloss | 60°,254µm | ASTM D2457 | 120 |
| Haze ratio | 254µm | ASTM D1003 | 2.7 % |
| physical property | Test Condition | Test Method | INEOS USA/210 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20-0.50 % |
| Apparent density | ASTM D1895 | 0.66 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 3.0 g/10min |
| Thermal performance | Test Condition | Test Method | INEOS USA/210 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 76.7 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 68.9 °C | |
| Linear coefficient of thermal expansion | MD：20到80°C | ASTM D696 | 6.7E-05 cm/cm/°C |
| thermal conductivity | ASTMC177 | 0.25 W/m/K | |
| specific heat | 20°C | ASTMC351 | 1340 J/kg/°C |
Contact Us
Get App
Top