Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A RV 200W RADIC ITALY
Radiflam®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodRADIC ITALY/A RV 200W
Impact strength of simply supported beam without notch23°CISO 179/1eU45 kJ/m²
-30°CISO 179/1eU40 kJ/m²
Mechanical propertiesTest ConditionTest MethodRADIC ITALY/A RV 200W
Tensile stress断裂ISO 527-2/1A/5140 Mpa
Tensile modulusISO 527-2/1A/16900 Mpa
Bending modulus 3ISO 1786300 Mpa
Tensile strain断裂ISO 527-2/1A/53.0 %
Bending stress 3ISO 178210 Mpa
Electrical performanceTest ConditionTest MethodRADIC ITALY/A RV 200W
Volume resistivity 5IEC 600931.0E+15 ohms·cm
CTI解决方案 AIEC 60112500 V
Surface resistivity 5IEC 600931.0E+12 ohms
flammabilityTest ConditionTest MethodRADIC ITALY/A RV 200W
Burning wire flammability index2.0 mmIEC 60695-2-12700 °C
flammabilityFMVSS 3020 mm/min
UL flame retardant rating0.8 mmUL 94HB
physical property Test ConditionTest MethodRADIC ITALY/A RV 200W
Water absorption rate饱和, 23°C, 2.00 mmISO 627.8 %
平衡, 23°C, 2.00 mm, 50% RHISO 622.1 %
Shrinkage rate流量ISO 294-40.40 %
横向流量ISO 294-40.90 %
Thermal performanceTest ConditionTest MethodRADIC ITALY/A RV 200W
1.8 MPa, 未退火ISO 75-2/Af220 °C
0.45 MPa, 未退火ISO 75-2/Bf250 °C
Melting temperature 4ISO 11357-3260 °C
vicatISO 306/B50240 °C
injectionTest ConditionTest MethodRADIC ITALY/A RV 200W
Temperature80 到 100 °C
Drying temperature - hot air dryer80 °C
Drying time - hot air dryer2.0 到 4.0 hr
Processing (melt) temperature280 到 300 °C
injection speed中等偏快
Suggested maximum moisture content0.15 %
Dew Point - Hot Air Drying Machine-20 °C

Contact Us

Get App

Top