Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 ADDINYL A2I V25 ADDIPLAST GERMANY
ADDINYL®
--
Flame retardant、Halogenation、enhance、Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 60 kJ/m² |
| hardness | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Shore hardness | 邵氏 D | ISO 868 | 90 |
| ISO 4589-2 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Limiting Oxygen Index | % | 32 -- |
| ISO 868 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Shore hardness | 邵氏 D | 90 89 |
| ISO 1183/A | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| density | g/cm³ | 1.37 -- |
| ISO 527-2 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| tensile strength | 断裂 | 130 MPa | |
| Tensile strain | 断裂 | % | 5 |
| flammability | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 960 °C | |
| UL flame retardant rating | 1.60 mm | UL 94 | V-0 |
| Limiting Oxygen Index | ISO 4589-2 | 32 % |
| ISO 75-2/Af | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | °C | 245 -- |
| UL 94 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| UL flame retardant rating | 1.60 mm | V-0 -- |
| Thermal performance | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/Af | 245 °C |
| melting temperature | ISO 3146 | 260 °C |
| IEC 60695-2-13 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Hot filament ignition temperature | °C | 960 -- |
| ISO 179/1eU | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | kJ/m² | 60 |
| Mechanical properties | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 5 % |
| Flexural modulus | ISO 178 | 7800 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 130 Mpa |
| Electrical performance | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Leakage Traceability Index (Solution A) | IEC 60112 | 600 V |
| test method | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Shore hardness | 干燥 调节后的 | ||
| Impact Strength | 干燥 调节后的 | ||
| Electrical performance | 干燥 调节后的 | ||
| Mechanical properties | 干燥 调节后的 | ||
| Thermal performance | 干燥 调节后的 | ||
| flammability | 干燥 调节后的 |
| ISO 178 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Flexural modulus | MPa | 7800 5500 |
| IEC 60112 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| Leakage Traceability Index (Solution A) | V | 600 -- |
| ISO 3146 | Test Condition | Test Method | ADDIPLAST GERMANY/ADDINYL A2I V25 |
|---|---|---|---|
| melting temperature | °C | 260 -- |
Contact Us
Get App
Top