Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PBT 1760 SABIC INNOVATIVE US
XENOY™
Automotive External Parts
Chemical resistance、High mobility、Glass fiber reinforced、High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/1760 |
|---|---|---|---|
| Dart impact | -30°C, Total Energy | ASTM D3763 | 3.00 J |
| -20°C, Energy at Peak | ASTM D3763 | 4.00 J | |
| 23°C, Total Energy | ASTM D3763 | 8.00 J | |
| -30°C, Energy at Peak | ASTM D3763 | 3.00 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/1760 |
|---|---|---|---|
| Tensile modulus | --1 | ASTM D638 | 5310 Mpa |
| tensile strength | 断裂 | ISO 527-2/5 | 84.0 Mpa |
| 屈服2 | ASTM D638 | 84.0 Mpa | |
| elongation | 断裂2 | ASTM D638 | 3.0 % |
| Flexural modulus | --4 | ISO 178 | 4010 Mpa |
| bending strength | 屈服, 50.0 mm 跨距3 | ASTM D790 | 131 Mpa |
| --4,5 | ISO 178 | 133 Mpa | |
| elongation | 屈服 | ISO 527-2/5 | 3.0 % |
| Flexural modulus | 50.0 mm 跨距3 | ASTM D790 | 3910 Mpa |
| tensile strength | 屈服 | ISO 527-2/5 | 84.0 Mpa |
| elongation | 屈服2 | ASTM D638 | 3.0 % |
| tensile strength | 断裂2 | ASTM D638 | 84.0 Mpa |
| Tensile modulus | -- | ISO 527-2/1 | 4800 Mpa |
| elongation | 断裂 | ISO 527-2/5 | 3.0 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/1760 |
|---|---|---|---|
| Melt volume flow rate | 265°C/5.0 kg | ISO 1133 | 27.0 cm3/10min |
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.15 % |
| Shrinkage rate | 横向流动 : 3.20 mm | 内部方法 | 0.40 - 0.60 % |
| melt mass-flow rate | 250°C/5.0 kg | ASTM D1238 | 15 g/10 min |
| Shrinkage rate | 流动 : 3.20 mm | 内部方法 | 0.40 - 0.60 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.50 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/1760 |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 3.9E-5 cm/cm/°C |
| Heat distortion temperature | 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距7，HDT | ISO 75-2/Af | 101 °C |
| vicat | -- | ISO 306/B120 | 130 °C |
| -- | ASTM D15258 | 121 °C | |
| Linear coefficient of thermal expansion | 横向 : -40°C | ISO 11359-2 | 7.6E-5 cm/cm/°C |
| vicat | -- | ISO 306/B50 | 135 °C |
| Heat distortion temperature | 1.8 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 116 °C |
| Linear coefficient of thermal expansion | 横向 : -40 到 40°C | ASTM E831 | 7.6E-5 cm/cm/°C |
| Heat distortion temperature | 1.8 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 125 °C |
| injection | Test Condition | Test Method | SABIC INNOVATIVE US/1760 |
|---|---|---|---|
| screw speed | 50 to 80 rpm | ||
| Suggested maximum moisture content | 0.020 % | ||
| Processing (melt) temperature | 260 to 280 °C | ||
| drying temperature | 110 °C | ||
| Suggested injection volume | 50 to 80 % | ||
| drying time | 4.0 to 6.0 hr | ||
| Temperature in the middle of the barrel | 255 to 275 °C | ||
| Temperature at the rear of the barrel | 250 to 270 °C | ||
| Exhaust hole depth | 0.013 to 0.020 mm | ||
| Temperature at the front of the material cylinder | 260 to 280 °C | ||
| Back pressure | 0.300 to 0.600 Mpa | ||
| Temperature | 65 to 95 °C | ||
| Spray nozzle temperature | 255 to 275 °C |
Contact Us
Get App
Top